Build a Firewood Cutting Jig - DIY Wood Processor

Built a Firewood Cutting Jig! This Firewood Cutting Jig is a fast and easy way to cut firewood from small stripped branches or sawmill slab wood. Can be used as a processor of slab-wood mill offcuts too.

Sections
1:14 Loading the Old Jig
2:39 Run Chainsaw down Slots of old Jig
3:19 Unload Firewood from Jig
3:40 How I'll improve on the Old Jig
4:40 Build the New Jig
5:04 Main Jig Components
5:22 Start Construction
12:36 Add Sides to Base
14:08 Build Handles
16:01 Add Supports
17:58 Attach Ropes and Weights
18:45 All Done!

SUBSCRIBE: https://www.youtube.com/channel/UC4H3_tjcENd5e_FneTNLFyA?sub_confirmation=1

PLANS: https://manabouttools.com/firewood-cutting-jig-digital-plan/

SUPPLIES, HARDWARE, and TOOLS for this project (affiliate links)
https://manabouttools.com/howto-make-firewood-cutting-jig/

The main VIDEO GEAR: https://manabouttools.com/tools-i-use/

FOLLOW ME:
Instagram: https://www.instagram.com/manabouttools/
Twitter: https://twitter.com/manabouttools
Facebook: https://www.facebook.com/manabouttools
Website: https://ManAboutTools.com

The Firewood Cutting Jig is a fast and easy way to cut firewood from small stripped branches or sawmill slab wood. The old jig was on our property when we purchased it and I have used it many times to cut wood. It's old and beat up so it's time to build a new one. It's an easy project for anyone with the a bit of carpentry skills and some basic tools.
DISCLAIMERS:
Some of these links have an affiliate code, if you purchase tools with these links I will receive a small commission at no additional cost to you. Thank you!

The tools seen in this video and have been purchased ourselves. This review and it's content was not reviewed or paid for by outside persons or manufacturers.
#firewood #homesteading #countrylife

Видео Build a Firewood Cutting Jig - DIY Wood Processor канала MAN about TOOLS