Build your own Stand Up Paddleboard

Anyone who is itching to tackle a stand up paddleboard construction project may find my design of interest. I wanted a SUP that was under 10 feet long, so it would not require registration in Minnesota. But, I also wanted one that was stable enough to fish from. It also needed to be sturdy, reasonably lightweight, and decent to look at.
It took 2 builds, but I nailed it with this design. The minimal internal framing is cut from 5mm plywood. Each bay is then filled with 2 layers of 2" foamboard, and skinned with 4mm marine plywood. All is then encapsulated with 6 ounce fiberglass and epoxy resin. I spent the winter writing a detailed instruction manual on how to build it. It's not as daunting as it looks. Check out "Walking on Water" here:https://www.amazon.com/dp/B09QP6QFBQ/ref=sr_1_1?crid=2SOG9KCS73XXF&keywords=building+a+stand+up+paddle+board+book&qid=1642943027&sprefix=building+a+stand+up+paddleboard+book%2Caps%2C128&sr=8-1

Видео Build your own Stand Up Paddleboard канала BackWood Basics