CR-10 Max review - Is bigger better?
The CR-10 Max lives up to its name, it's enormous! Following on from my unboxing and initial impressions video, I've finally finished my review after some toil. Some of my prints are amazing, but some of my problems shouldn't have happened on a 3D printer of this expense.
You shouldn't buy this printer because:
- The quality control is hit and miss
- Slicing profiles aren't provided
- It takes up a heap of room
- It uses a lot of filament
- It's not cheap
You should buy this printer because:
- You are experienced and happy to fix the niggling problems
- You are experienced and can tune your slicing profile
- It has high quality components that will perform well when the little things are fixed
- You want to print large, awesome things that won't fit on other printers
- You want a polished, modern 3D printer compared to a CR-10 S5
Which category do you fit in?
This printer is mechanically very similar to the CR-10S Pro. I didn't test filaments other than PLA because I figured the performance would be the same as that printer (review linked below).
This printer provide free of charge by Creality for the purpose of making this review. All opinions expressed are my own.
Helmet by Markom3D: https://www.youtube.com/watch?v=VUmqJgLs1-M
Purchase the CR-10 Max from these links:
Creality official store: https://www.creality3dofficial.com/products/creality-cr-10-max-3d-printer?sca_ref=16987.xbmLCEL46n
Amazon: https://amzn.to/2n8MPC0
Tiny Machines: http://bit.ly/2uyWoOT
CR-10 Max first impressions: https://youtu.be/UGYc-L6dmLE
CR-10S Pro review: https://youtu.be/J0yvGP63nD0
CR-10S Pro fixes: https://youtu.be/iw5HfHxlnwI
CR-10S Pro firmware upgrade guide: https://youtu.be/SBX30GmM3Qo
My Simplify3D 0.8mm nozzle fff file: https://gum.co/lRyYG
Models featured in this video:
Glider: https://www.thingiverse.com/thing:90134
3D benchy: https://www.thingiverse.com/thing:763622
Bowl: https://www.thingiverse.com/thing:2230232
T Rex skull: https://www.thingiverse.com/thing:308335
Wolverine claws: https://www.thingiverse.com/thing:28270
Markom3D helmet: https://www.thingiverse.com/thing:3882611
Flip out pirate sword: https://www.thingiverse.com/thing:3597069
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
#3dprinting #cr-10max #review
Видео CR-10 Max review - Is bigger better? канала Teaching Tech
You shouldn't buy this printer because:
- The quality control is hit and miss
- Slicing profiles aren't provided
- It takes up a heap of room
- It uses a lot of filament
- It's not cheap
You should buy this printer because:
- You are experienced and happy to fix the niggling problems
- You are experienced and can tune your slicing profile
- It has high quality components that will perform well when the little things are fixed
- You want to print large, awesome things that won't fit on other printers
- You want a polished, modern 3D printer compared to a CR-10 S5
Which category do you fit in?
This printer is mechanically very similar to the CR-10S Pro. I didn't test filaments other than PLA because I figured the performance would be the same as that printer (review linked below).
This printer provide free of charge by Creality for the purpose of making this review. All opinions expressed are my own.
Helmet by Markom3D: https://www.youtube.com/watch?v=VUmqJgLs1-M
Purchase the CR-10 Max from these links:
Creality official store: https://www.creality3dofficial.com/products/creality-cr-10-max-3d-printer?sca_ref=16987.xbmLCEL46n
Amazon: https://amzn.to/2n8MPC0
Tiny Machines: http://bit.ly/2uyWoOT
CR-10 Max first impressions: https://youtu.be/UGYc-L6dmLE
CR-10S Pro review: https://youtu.be/J0yvGP63nD0
CR-10S Pro fixes: https://youtu.be/iw5HfHxlnwI
CR-10S Pro firmware upgrade guide: https://youtu.be/SBX30GmM3Qo
My Simplify3D 0.8mm nozzle fff file: https://gum.co/lRyYG
Models featured in this video:
Glider: https://www.thingiverse.com/thing:90134
3D benchy: https://www.thingiverse.com/thing:763622
Bowl: https://www.thingiverse.com/thing:2230232
T Rex skull: https://www.thingiverse.com/thing:308335
Wolverine claws: https://www.thingiverse.com/thing:28270
Markom3D helmet: https://www.thingiverse.com/thing:3882611
Flip out pirate sword: https://www.thingiverse.com/thing:3597069
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
#3dprinting #cr-10max #review
Видео CR-10 Max review - Is bigger better? канала Teaching Tech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Why direct drive is not automatically better than bowden tubeSupersizing an Ender 3 V2: CR-10 Max for half the moneyPost processing huge 3D prints: Metal & Bone + 3D GloopCreality CR-10 MAX Review - The Ultimate Cosplay Printer?Creality CR-10S Pro - An honest review *UPDATE IN DESCRIPTION*The BEST 3D printing material? Comparing PLA, PETG & ASA (ABS) - feat. PRUSAMENT by Josef Prusa12 3D printed tools you need for your workshopCreality CR-10 Max 3D printer review - all you need to knowRevised: 3D Printing - 13 Things I Wish I Knew When I Got StartedMy Favorite Designs from 6 Years of 3D Printing!How the #speedboatrace helped me slash time from quality prints | Rat Rig V-core 3 Part 5Creality CR-10 Max first impressions: Is bigger better?How a 3DBenchy can tell where your 3D prints need improvementWhy the Creality CR-10 Smart is not so smart - Honest reviewGuide to 3D Printing Filament! PLA ABS PETG TPU PEEK ULTEMHemera install guide for CR-10S Pro / CR-10 MaxCreality Ender 3 Max ReviewArtillery 3D X1 Sidewinder Review: A unique challenger to the CR-10S3D printer calibration site V2 - Still free and better than ever!Creality CR-10 - Is It The Best 3D Printer? My Review