Hemera install guide for CR-10S Pro / CR-10 Max
The Hemera (formerly Hermes) is a new all in one extruder/stepper/hot end by E3d. Building on my Ender 3 guide, I’m now fitting this permanently to the CR-10 Max (also compatible with CR-10S Pro).
The Hemera in isolation is a beautifully engineered piece of kit and will thrive on a printer designed for it from the ground up. On this printer, it’s a much better fit, especially when paired with a volcano hot end and large nozzle set.
My mount aims to act as a spacer so that the Hemera bolts into the metal carriage. Two holes need to be drilled using it as a template. This is designed for the volcano hot end, the regular V6 may not reach.
More info on the engineering: https://e3d-online.com/blog/2019/11/29/e3d-hemera-a-next-generation-extrusion-system/
Thanks to all of those in the community who have designed parts for this kit.
Purchase the Hemera (please check voltage and filament diameter options):
E3D: https://e3d-online.com/e3d-hemera-175-kit
Amazon: https://amzn.to/2tGiyh8
Tiny machines: http://bit.ly/39kSRCC
Phaser FPV (Aus): https://www.phaserfpv.com.au/collections/featured-products/products/e3dhermes175mm24vdirectkitextruderhotendhermes-175-d-24v
Previous Hemera guide for Ender 3: https://youtu.be/oY1F7fUBHrc
01:08 Brief overview of Hemera
02:03 TH3D solid bed mounts: https://www.th3dstudio.com/product/cr-10solidmounts/?share=lawgicau
02:28 Step 1: Swap to E3D Volcano hot end
E3D guide for this: https://e3d-online.dozuki.com/Guide/Upgrading+to+a+Volcano/8?lang=en
Volcano nozzle dot reference: https://e3d-online.com/brass-nozzles-volcano
03:37 Step 2: Wiring
Example of compatible part cooling fan: https://amzn.to/2GKBYF9
05:20 Step 3: Designing and print mounting parts:
My custom mounting parts for CR-10 Max/CR-10S Pro: https://www.thingiverse.com/thing:4141883
5015 blower fan duct by Hangtight (duct mount plate and volcano duct parts): https://www.thingiverse.com/thing:4042492
Alloy carriage replacement by Portzal: https://www.thingiverse.com/thing:4099686
07:12 Step 4: Physical install
11:49 Step 5: Firmware
InsanityAutomation Creality Marlin 2.0 branch: https://github.com/InsanityAutomation/Marlin/tree/CrealityDwin_2.0
My configuration.h: https://pastebin.com/Qb29ayVH
CR-10S Pro / CR-10 Max firmware update guide: https://youtu.be/SBX30GmM3Qo
Pronterface: https://www.pronterface.com
13:51 Step 6: Calibration
Pronterface download: https://www.pronterface.com/index.html#download
Set e-steps reference: http://marlinfw.org/docs/gcode/M092.html
PID autotune reference: http://marlinfw.org/docs/gcode/M303.html
More detailed video on PID autotune: https://youtu.be/qCtL0Yd_w0I
E3D VREF setting: https://e3d-online.dozuki.com/Guide/05+-+E3D+Hemera+VREF+adjustment./143
More detailed video on setting VREF for the Ender 3: https://youtu.be/H41hIXdB6js
More detailed video on E-steps calibration: https://youtu.be/3yIebnVjADM
16:43 Test prints
20mm calibration cube: https://www.thingiverse.com/thing:214260
Baby manticore: https://www.myminifactory.com/object/3d-print-baby-manticore-105278
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
Видео Hemera install guide for CR-10S Pro / CR-10 Max канала Teaching Tech
The Hemera in isolation is a beautifully engineered piece of kit and will thrive on a printer designed for it from the ground up. On this printer, it’s a much better fit, especially when paired with a volcano hot end and large nozzle set.
My mount aims to act as a spacer so that the Hemera bolts into the metal carriage. Two holes need to be drilled using it as a template. This is designed for the volcano hot end, the regular V6 may not reach.
More info on the engineering: https://e3d-online.com/blog/2019/11/29/e3d-hemera-a-next-generation-extrusion-system/
Thanks to all of those in the community who have designed parts for this kit.
Purchase the Hemera (please check voltage and filament diameter options):
E3D: https://e3d-online.com/e3d-hemera-175-kit
Amazon: https://amzn.to/2tGiyh8
Tiny machines: http://bit.ly/39kSRCC
Phaser FPV (Aus): https://www.phaserfpv.com.au/collections/featured-products/products/e3dhermes175mm24vdirectkitextruderhotendhermes-175-d-24v
Previous Hemera guide for Ender 3: https://youtu.be/oY1F7fUBHrc
01:08 Brief overview of Hemera
02:03 TH3D solid bed mounts: https://www.th3dstudio.com/product/cr-10solidmounts/?share=lawgicau
02:28 Step 1: Swap to E3D Volcano hot end
E3D guide for this: https://e3d-online.dozuki.com/Guide/Upgrading+to+a+Volcano/8?lang=en
Volcano nozzle dot reference: https://e3d-online.com/brass-nozzles-volcano
03:37 Step 2: Wiring
Example of compatible part cooling fan: https://amzn.to/2GKBYF9
05:20 Step 3: Designing and print mounting parts:
My custom mounting parts for CR-10 Max/CR-10S Pro: https://www.thingiverse.com/thing:4141883
5015 blower fan duct by Hangtight (duct mount plate and volcano duct parts): https://www.thingiverse.com/thing:4042492
Alloy carriage replacement by Portzal: https://www.thingiverse.com/thing:4099686
07:12 Step 4: Physical install
11:49 Step 5: Firmware
InsanityAutomation Creality Marlin 2.0 branch: https://github.com/InsanityAutomation/Marlin/tree/CrealityDwin_2.0
My configuration.h: https://pastebin.com/Qb29ayVH
CR-10S Pro / CR-10 Max firmware update guide: https://youtu.be/SBX30GmM3Qo
Pronterface: https://www.pronterface.com
13:51 Step 6: Calibration
Pronterface download: https://www.pronterface.com/index.html#download
Set e-steps reference: http://marlinfw.org/docs/gcode/M092.html
PID autotune reference: http://marlinfw.org/docs/gcode/M303.html
More detailed video on PID autotune: https://youtu.be/qCtL0Yd_w0I
E3D VREF setting: https://e3d-online.dozuki.com/Guide/05+-+E3D+Hemera+VREF+adjustment./143
More detailed video on setting VREF for the Ender 3: https://youtu.be/H41hIXdB6js
More detailed video on E-steps calibration: https://youtu.be/3yIebnVjADM
16:43 Test prints
20mm calibration cube: https://www.thingiverse.com/thing:214260
Baby manticore: https://www.myminifactory.com/object/3d-print-baby-manticore-105278
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
Видео Hemera install guide for CR-10S Pro / CR-10 Max канала Teaching Tech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Creality CR-10 Max 3D printer review - all you need to know](https://i.ytimg.com/vi/lE9i1-DX1aI/default.jpg)
![7 fixes for the CR-10S Pro - Unlock the potential!](https://i.ytimg.com/vi/iw5HfHxlnwI/default.jpg)
![Hemera to Ender 3 - Complete guide](https://i.ytimg.com/vi/oY1F7fUBHrc/default.jpg)
![Creality CR-10 Max first impressions: Is bigger better?](https://i.ytimg.com/vi/UGYc-L6dmLE/default.jpg)
![How to Install a E3D Hemera on a Creality CR-10 v2](https://i.ytimg.com/vi/sn0mLLTGF28/default.jpg)
![Taking it to the Extreme with the SUPER Volcano](https://i.ytimg.com/vi/h0LxiKVpQHQ/default.jpg)
![Creality Cr10S PRO upgrades - Noctua fans install and more](https://i.ytimg.com/vi/lde-SSY4vtw/default.jpg)
![Flex3drive G5 open source remote flex drive extruder guide - Seckit SK-GO](https://i.ytimg.com/vi/6SJGHCNyebM/default.jpg)
![How to update CR-10S Pro firmware - LCD and mainboard](https://i.ytimg.com/vi/SBX30GmM3Qo/default.jpg)
![Micro Swiss Dual Gear Direct Drive Upgrade For Ender 3 and CR-10 3D Printers](https://i.ytimg.com/vi/5mUT6dB5HcQ/default.jpg)
![Creality CR-10S Pro - An honest review *UPDATE IN DESCRIPTION*](https://i.ytimg.com/vi/J0yvGP63nD0/default.jpg)
![Complete beginner's guide to 3D printing - Assembly, tour, slicing, levelling and first prints](https://i.ytimg.com/vi/T-Z3GmM20JM/default.jpg)
![Beta testing the Creality CP-01: 3D printer + laser + CNC all in one](https://i.ytimg.com/vi/s__H_bcFvds/default.jpg)
![Print Flexibles At Insane Speeds With E3D HEMERA - Ender 3 Upgrade](https://i.ytimg.com/vi/Ws-rDTRzFlI/default.jpg)
![CoreXY explained: Comparison + strengths & weaknesses](https://i.ytimg.com/vi/_ramiM3KHYE/default.jpg)
![Creality CR10 s pro First layer bed test - A beginners guide to a better first layer](https://i.ytimg.com/vi/eO_uZnwtNtw/default.jpg)
![Is Simplify3D worth the price? S3D vs Cura vs PrusaSlicer](https://i.ytimg.com/vi/-DSrAmI1vjk/default.jpg)
![How to Install an E3D Hemera on a Creality Ender 5 Plus](https://i.ytimg.com/vi/-6C7sGRkZSc/default.jpg)
![Modular direct drive kit for Ender 3, 5 and CR-10 for under $40](https://i.ytimg.com/vi/VK_FUvxwGxM/default.jpg)
![Cr10SPro ... Critical Fix you need to make ... ASAP, Extruder issue SOLVED!](https://i.ytimg.com/vi/h7-wWXDN6z8/default.jpg)