How to update CR-10S Pro firmware - LCD and mainboard

The CR-10S Pro firmware is easy to update because it doesn't require burning a bootloader, however it does require updating both the mainboard and LCD firmware at the same time. This video is a step by step guide to doing just this.

After you've done this once you'll see it's not very hard. I encourage you to keep your firmware updated in future, especially when it is free to do so.

If you are updating to a vastly newer version of the firmware, it can be a good idea to wipe the values in the EEPROM with M502, M500, M501. This will mean setting esteps, z offset and anything else you've saved to eeprom again.

Tinymachines CR-10S Pro firmware (recommended): https://www.tinymachines3d.com/pages/10spro
Creality firmware download: https://www.creality3d.cn/creality3d-cr-10s-pro-p00253p1.html
Arduino IDE download: https://www.arduino.cc/en/Main/Software
Creality drivers from TH3D: https://www.th3dstudio.com/knowledgebase/creality-printer-drivers-all-models/
Pronterface (if you want to connect to the printer via USB terminal): http://www.pronterface.com/
Cura (for flashing HEX files: https://ultimaker.com/en/products/ultimaker-cura-software

Purchase the CR-10S Pro from the following links:
Banggood: https://www.banggood.com/custlink/KKDmEg25qV
Amazon: https://amzn.to/2UhBjjH
Tiny Machines: http://bit.ly/2OELf65
Aliexpress: http://s.click.aliexpress.com/e/4eUyNoy
eBay Aus: https://ebay.to/2BXubl5

Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au

Take a look around and if you like what you see, please subscribe.

Support me on Patreon: http://www.patreon.com/teachingtech

#cr-10spro #firmware #3dprinting

Видео How to update CR-10S Pro firmware - LCD and mainboard канала Teaching Tech