Gyroflow test with "DJI O3"
Stabilization test with Gyroflow on "DJI O3," obviously with RockSteady disabled.
I intentionally overtuned the roll in this racer so as to generate these fast oscillations.
Gyroflow stabilizes in post production much better than RockSteady, which in the same situation generates small abberations on the extreme sides of the footage.
So as far as I am concerned RockSteady disabled in my O3s.
Видео Gyroflow test with "DJI O3" канала Marco Robustini
I intentionally overtuned the roll in this racer so as to generate these fast oscillations.
Gyroflow stabilizes in post production much better than RockSteady, which in the same situation generates small abberations on the extreme sides of the footage.
So as far as I am concerned RockSteady disabled in my O3s.
Видео Gyroflow test with "DJI O3" канала Marco Robustini
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
It's snow time at the HelyTeam Airfield (Ferrara - Italy)"Marcopter HV1 Heavy Hexa" - Second anti-vibration test with 2 axis brushless gimbal (Canon EOS M)First tests with "DJI Phantom 3 Professional" at "AVF - Helyteam" airfield (Ferrara - Italy)ArduCopter V2.8.2 - Loiter test (light wind)ArduCopter V2.4 - New motors test (easy and intuitive) - X QuadArduCopter V2.5.0 Alpha - Daily test (Andrew Tridgell GIT)"Rescue FC" redundancy system preview - FCU switch tests...ArduCopter V2.3 - Loiter stress - High rate P/D value - Zero/Strong Wind (AeroSim)L'efficacia dei sistemi antidrone - "Roma Drone Conference" (23 Marzo 2016)ArduCopter V2.9.1.2 (VR Brain) - Marco Scissorhands... :P"AVF - Aeroclub Volovelistico Ferrarese"ArduCopter V2.9.2β "wpnavlib4" - Loiter test (max radius = 1.5 meter)3DRobotics Pixhawk V2.4 fail during boot"DronAZZO" - Drying in the air after the stormI primi passi nel disegno 3D e nello slicing avanzatoArduCopter V2.9.1.3 (VR Brain) - "Tarot FY650" payload test (1 Kg)ArduCopter V2.9 Final - AutolandingKlipper: dai una nuova vita alla tua stampante 3d! (HOW-TO)"Volare in sicurezza" - Marco Robustini ("HMESE" 2015)Beta Technologies ALIA-250 - Ardupilot SITL in X-Plane 12First test with "Devilray" by "Carbondrone" and "3 axis DYS gimbal"