Creality Hyper PLA filament review, designed for faster printing
Hyper PLA by Creality is filament designed for faster 3D printing. According to specs, Hyper Series PLA supports up to 600mm/s print speed.
Hyper PLA in Creality Store: https://shrsl.com/49132
At the time, my fastest Creality 3D printer was the Ender-5 S1, with max speed of 250 mm/s, but with low acceleration compared to CoreXY printers. This has effect on smaller parts, printer cannot reach its max speed. In some tests it was compared to CR-PLA, which was opened 2 years ago, spool from this video: https://youtu.be/YI9dcCAQV1A?si=q_IAn2UVgZIiksIQ
Results: https://www.mytechfun.com/video/318
Patreon supporters have access to summary (all results) table, mentioned in the video. https://www.patreon.com/mytechfun
Contents:
0:00 Introduction
1:30 Unboxing
1:53 3D printing
3:59 CR-PLA 3D printing
4:40 Layer adhesion test
5:17 Hook test
5:51 Tensile test
6:05 Shear test
6:19 Twist test
6:41 Impact test
7:10 Bending test
7:45 Temperature test
8:18 Creep test
9:05 Results
12:26 Conclusions
#3dprinting #creality #pla #plafilament
Видео Creality Hyper PLA filament review, designed for faster printing канала My Tech Fun
Hyper PLA in Creality Store: https://shrsl.com/49132
At the time, my fastest Creality 3D printer was the Ender-5 S1, with max speed of 250 mm/s, but with low acceleration compared to CoreXY printers. This has effect on smaller parts, printer cannot reach its max speed. In some tests it was compared to CR-PLA, which was opened 2 years ago, spool from this video: https://youtu.be/YI9dcCAQV1A?si=q_IAn2UVgZIiksIQ
Results: https://www.mytechfun.com/video/318
Patreon supporters have access to summary (all results) table, mentioned in the video. https://www.patreon.com/mytechfun
Contents:
0:00 Introduction
1:30 Unboxing
1:53 3D printing
3:59 CR-PLA 3D printing
4:40 Layer adhesion test
5:17 Hook test
5:51 Tensile test
6:05 Shear test
6:19 Twist test
6:41 Impact test
7:10 Bending test
7:45 Temperature test
8:18 Creep test
9:05 Results
12:26 Conclusions
#3dprinting #creality #pla #plafilament
Видео Creality Hyper PLA filament review, designed for faster printing канала My Tech Fun
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Creality Enclosure for laser engravers (protective cover) - the review ant test](https://i.ytimg.com/vi/BQiQJnbN9jY/default.jpg)
![Creality Falcon 2 40w diode laser engraver review - strongest on this channel so far](https://i.ytimg.com/vi/_GvbbsXZyPc/default.jpg)
![GratKit Firefly App controlled Filament Dryer review](https://i.ytimg.com/vi/eYGLFAmLLfE/default.jpg)
![Prusament PETG-CF (Carbon Fiber) vs PETG V0 (fire resistant filament)](https://i.ytimg.com/vi/AlayVWWPuCc/default.jpg)
![Gratkit 8k Rigid Resin review](https://i.ytimg.com/vi/S_pJBWRhskg/default.jpg)
![Mintion LaserCam - remote controll camera for laser engraving](https://i.ytimg.com/vi/RQkXCXfj7vY/default.jpg)
![Hardened steel nozzle vs brass nozzle - the layer adhesion test](https://i.ytimg.com/vi/2FXyN1Q9Bzs/default.jpg)
![Wizmaker L1 36W laser engraver review](https://i.ytimg.com/vi/q-I2kaG1KL4/default.jpg)
![Semiflex PLA by Filaticum - the review](https://i.ytimg.com/vi/ZIu--5-nl3E/default.jpg)
![Oozing shield vs prime tower, which is better for two color 3D printing on Sovol SV04 IDEX printer?](https://i.ytimg.com/vi/SjGjpXwBzQo/default.jpg)
![eSun eTPU-95A vs eTPU-Antibacteria (new name eTPU-HS) - flex filament comparison](https://i.ytimg.com/vi/gfqou3Fr5gI/default.jpg)
![Kingroon's fast Klipper 3D printer: KP3S Pro V2](https://i.ytimg.com/vi/2tjTUEnOoYk/default.jpg)
![Mingda Magician X2 review: cheap and quiet 3D printer](https://i.ytimg.com/vi/CQym3Kc9tzw/default.jpg)
![The most powerful laser I tested so far: Longer Laser B1 30W](https://i.ytimg.com/vi/8xMBFByWqJo/default.jpg)
![Einstar 3D scanner by Shining 3D - a great scanner for handheld scanning](https://i.ytimg.com/vi/1XW_LCNWqZE/default.jpg)
![XY calibration camera for IDEX 3D printers by Ember Prototypes - tested on Sovol SV04](https://i.ytimg.com/vi/wJp_IZqt4BQ/default.jpg)
![Why to use PETG over PLA? Kingroon PLA, PETG review. Also: Kingroon vacuum storage system testing](https://i.ytimg.com/vi/ggMkfHMlzsE/default.jpg)
![So, is it really faster? Creality Sonic Pad test with Ender-5 S1](https://i.ytimg.com/vi/cv8lf0eTZbw/default.jpg)
![3DMakerPro Mole 3D scanner review - a great scanner for mid-size objects](https://i.ytimg.com/vi/1sZjSsa4W7c/default.jpg)
![Adding strain relief to Kingroon KP3S 3D printers heatbed cable #shorts](https://i.ytimg.com/vi/Au4TlwxP-K8/default.jpg)
![Sovol SV07 Klipper based 3D printer review](https://i.ytimg.com/vi/hvAiDhvuNng/default.jpg)