Kingroon's fast Klipper 3D printer: KP3S Pro V2

KP3S Pro V2 is a very fast 3D printer by Kingroon. It is based on Klipper and can 3D print a Benchy in 22 minutes.
Product page: https://kingroon.com/products/kingroon-kp3s-pro-v2-with-klipper-firmware?sca_ref=3869156.YFSe4dlZ8w
This is a compact 3D printer with a very small footprint on the desk. It is equipped with a direct drive extruder, inductive auto leveling sensor, and textured PEI sheet. Accelerometers are built in the printer, so they don't have to be attached by user during the input shaping.
The articulated dragon is printed in 3 hours (same object would need 12 hours on Ender-3 S1).

Mentioned in the video:
Calibration cube, dice: https://www.printables.com/model/399278-dice-as-20mm-xyz-calibration-cube
Heat bed cable guide: https://www.printables.com/model/511425-kingroon-kp3s-pro-v2-bed-cable-guide
Articulated dragon: https://www.printables.com/model/210311-articulated-spirit-dragon_-dragon_no-support_easy-
Low poly vase: https://www.printables.com/model/289439-low-poly-vase
Noise comparison table: https://www.mytechfun.com/3dprinter-noise

Contents:
0:00 Introduction, specifications
2:09 Unboxing
4:11 Assembling
6:47 Bed cable guide
7:29 Turning ON
7:58 Connecting to WiFi
8:58 Leveling
9:42 Input shaper
10:04 Preparing the first printing
10:54 Benchy (factory gcode)
14:11 Slicer
14:58 Calibration cube (PLA)
16:46 Spiral (vase) mode
19:26 Articulated dragon
21:36 Filament change
23:12 Conclusions

#kingroon #klipper #3dprinting #3dprinter #kp3s

Видео Kingroon's fast Klipper 3D printer: KP3S Pro V2 канала My Tech Fun