MOSFET gate driver using transistors - sorta works
A high-side MOSFET gate driver created with discrete components.
** Lamp turns om but not to bright to see on mobile
There was a problem! It needs dead-time in the low phase of the 2 PWM signals, otherwise the source shorts to ground.
So I cheated with an Arduino to do that for me. Don't know how to do that with discrete components yet. But will figure it out some day.
Видео MOSFET gate driver using transistors - sorta works канала krakkus
** Lamp turns om but not to bright to see on mobile
There was a problem! It needs dead-time in the low phase of the 2 PWM signals, otherwise the source shorts to ground.
So I cheated with an Arduino to do that for me. Don't know how to do that with discrete components yet. But will figure it out some day.
Видео MOSFET gate driver using transistors - sorta works канала krakkus
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
PyDuino add IO to a PCDIY Ideal-diode circuit using transistors and MOSFET, schematic at the end :)eBay converter controllerThe 74HC595 shift registerToday I learned nothing :) - Inverter repair failed - Part 1ATTINY84 for dual PWM signalMotorized Zoom Lens #2 - Motors working, IR filter installedHow to make tflite-model-maker work again in 2024 - for WindowsMake a 12V car light go 24V - two filaments in seriesHow to use the IR2125 MOSFET gate driverOp-amp as comparator & voltage followerResistor simulator - v0.3aHacking a DC-to-DC converter from eBayProgramming an ATTINY from an ArduinoDC converter hack #4 - Boost converterHow to add dead-time to PWM9 ways to drive a MOSFET, with examples8 bit 8 resistor digital to analog converterBootstrap circuit for high side MOSFET drivingBuild your own digital-to-analog-converter in under 10 minutes.