Odds and Ends 49: A collection of Tool and Die Maker Tools
I recently acquired a large lot of tools from a retired machinist / tool and die maker. We will go through the boxes of tools and show you all of the goodies inside that will be a nice addition to my machine shop tool box!
Видео Odds and Ends 49: A collection of Tool and Die Maker Tools канала Keith Rucker - VintageMachinery.org
Видео Odds and Ends 49: A collection of Tool and Die Maker Tools канала Keith Rucker - VintageMachinery.org
Показать
Комментарии отсутствуют
Информация о видео
16 мая 2016 г. 17:23:55
00:35:30
Другие видео канала
Camelback Drill Press Gears 2: Cutting Gear Teeth on the First Gear
Diresta Bandsaw Restoration 27: Finishing the Bottom Wheel and Installing the Table
Horizontal Boring Mill Restoration: Installing the Table Lead Screw and Tailstock Base
Lucas Horizontal Boring Mill Restoration: Making a Morse Taper No. 5 Tailstock Adapter
Cutting Spur Gears on a Kearney & Trecker 3H Horizontal Milling Machine
Repairing the Rapid Traverse Clutch Pack on a Kearny & Trecker 2H Horizontal Mill
Horizontal Boring Mill Restoration: Milling an End Spline to Repair the Crank Handle
Glover Steam Locomotive Dash-Pots: Re-Valved, Re-Seated, Restored!
Metal Planer Restoration 70: Way Wipers
Monarch 10EE Lathe Gear Segment, Part 4: Grinding to Length and Drilling Pins
Lucas Horizontal Boring Mill Restoration: Turning and Installing a New Bronze Bushing
Wells Index Mill: Repairing the Tilt Gear - Part 2
Camelback Drill Press Gears - Part 1: Making the First Gear Ring
Horizontal Boring Mill: Making a new Lead Screw Nut with Internal Left Hand Acme Threads - Part 1
Sugar Cane Mill Restoration: Machining Custom Square Head Nuts on the Metal Lathe
Jimmy Diresta Bandsaw Restoration 21: Machining a New Upper Wheel Shaft with a Tapered Spindle
Monarch 16" Lathe Restoration 7: Clearing Oil Lines
B-17 Bomber Restoration: Broaching a Square Hole for Landing Gear Part
Camelback Drill Gears 3: Making a Gear Arbor with Integrated 15 Tooth Gear
Landis Surface Grinder: Boring and Bushing the worn Pulley Bore
Diresta Bandsaws Restoration 22: Pouring Babbitt Bearings on the Upper Wheel Shaft