The Mulbot - 3D Printed Printer

The Mulbot 3D Printed Printer!!
I am excited to introduce to you the Mulbot! This is a 3D printed printer that I designed and built to bring to MRRF next year. Not only does it use 3D printed recirculating ball bearings but it is driven by a 3D printed rack and pinion, 3D printed pulleys and a belt, and 3D printed nuts and trapezoidal screws.

This is just a short introductory clip because I was so excited to show everyone the project. You can try subscribing or following me on thingiverse for notifications.
https://www.thingiverse.com/3DPRINTINGWORLD/about

The Mulbot is finally released! You can find stl's, instructions, and the BOM here: https://www.thingiverse.com/thing:3432384

Join our Facebook group: https://www.facebook.com/groups/275718849985834

***Sponsors***
Please help to support the sponsors for this project. When I reached out to them and told them that I was building this printer to bring to MRRF they all offered to help with no questions asked by providing the necessary components. I put some affiliate links below.

Filament:
Solutech Real Red 1.75mm PLA: https://amzn.to/2DqQd2m
Soultech Real Blue 1.75mm PLA: https://amzn.to/2OreAxD
Soultech Real White 1.75mm PLA: https://amzn.to/2SPxTEl

Sainsmart White for Timing Belt 1.75mm TPU: https://amzn.to/2QwaF4o
Sainsmart Red for feet 1.75mm TPU: https://amzn.to/2PGZWHo

Components:
Cabricorn Bowden Tubing
https://www.captubes.com/

E3D v6 Hotend provided by Filastruder:
https://www.filastruder.com

Seemecnc EZR Extruder provided by Matterhackers:
https://www.matterhackers.com/store/l/seemecnc-ezrstruder-kit/sk/MWHJ83XV?aff=7457

Ramps 1.4 Printer Kit provided by Sainsmart:
http://shrsl.com/1be01

Видео The Mulbot - 3D Printed Printer канала 3D Printing World