More testing done with the Mulbot!
I have had some time to calibrate and run a couple prints on the Mulbot! Have a request or a question, let me know in the comments below.
Join our Facebook group: https://www.facebook.com/groups/275718849985834
I plan on releasing the STL's soon, can try subscribing or follow me on thingiverse for notifications.
https://www.thingiverse.com/3DPRINTINGWORLD/about
Stl's for the Mini Collapsible Basket:
https://www.thingiverse.com/thing:2918084
***Sponsors***
Please help to support the sponsors for this project.
Filament:
Solutech Real Red 1.75mm PLA: https://amzn.to/2DqQd2m
Soultech Real Blue 1.75mm PLA: https://amzn.to/2OreAxD
Soultech Real White 1.75mm PLA: https://amzn.to/2SPxTEl
Sainsmart White for Timing Belt 1.75mm TPU: https://amzn.to/2QwaF4o
Sainsmart Red for feet 1.75mm TPU: https://amzn.to/2PGZWHo
Components:
Cabricorn Bowden Tubing
https://www.captubes.com/
E3D v6 Hotend provided by Filastruder:
https://www.filastruder.com
Seemecnc EZR Extruder provided by Matterhackers:
https://www.matterhackers.com/store/l/seemecnc-ezrstruder-kit/sk/MWHJ83XV?aff=7457
Ramps 1.4 Printer Kit provided by Sainsmart:
http://shrsl.com/1be01
Affiliate links.
Amazon: https://amzn.to/2D76JU0
Matterhackers: http://www.matterhackers.com?aff=7457
Видео More testing done with the Mulbot! канала 3D Printing World
Join our Facebook group: https://www.facebook.com/groups/275718849985834
I plan on releasing the STL's soon, can try subscribing or follow me on thingiverse for notifications.
https://www.thingiverse.com/3DPRINTINGWORLD/about
Stl's for the Mini Collapsible Basket:
https://www.thingiverse.com/thing:2918084
***Sponsors***
Please help to support the sponsors for this project.
Filament:
Solutech Real Red 1.75mm PLA: https://amzn.to/2DqQd2m
Soultech Real Blue 1.75mm PLA: https://amzn.to/2OreAxD
Soultech Real White 1.75mm PLA: https://amzn.to/2SPxTEl
Sainsmart White for Timing Belt 1.75mm TPU: https://amzn.to/2QwaF4o
Sainsmart Red for feet 1.75mm TPU: https://amzn.to/2PGZWHo
Components:
Cabricorn Bowden Tubing
https://www.captubes.com/
E3D v6 Hotend provided by Filastruder:
https://www.filastruder.com
Seemecnc EZR Extruder provided by Matterhackers:
https://www.matterhackers.com/store/l/seemecnc-ezrstruder-kit/sk/MWHJ83XV?aff=7457
Ramps 1.4 Printer Kit provided by Sainsmart:
http://shrsl.com/1be01
Affiliate links.
Amazon: https://amzn.to/2D76JU0
Matterhackers: http://www.matterhackers.com?aff=7457
Видео More testing done with the Mulbot! канала 3D Printing World
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Starship model rocket Test flight #3, with spinning tail fins for stability.3D Printed Stepper Slide Load TestAngular Jaw GripperThe Magnolia Box Assembly #hotmakesBYOK (Build Your Own Katana)3D Printed Motor Driven Jack ScrewNight Light LithophaneDovetail Stepper Slide Repeatability Test3D Printed Linear Slide (Print In Place)3D Printed JACK SCREW TEST3D Printed MECHANICAL ACTUATOR3d Printed Idler pulleyParallel Jaw Offset GripperRack and Pinion Hand Cranked Drive3D Printed KlackersAngular Jaw Gripper3D Printed DC Motor ControllerCollapsing Lego Katana!3D Printed Belt ActuatorThe Mulbot - 3D Printed Printer