Animatronic Eyes made with Toy Parts and Arduino

Animatronic eyes robot project using toy parts and common electronics to control the eye movement.

The eye movement mechanism uses 2 servo motors to control the left/right and up/down movement.

Another 2 servo motors to control the blinking eyes mechanism of left and right eyelids.

The frame was build using LEGO Technic parts.

I was inspired from Ikkalebob animatronic eye project from Instructables.
Check out his awesome DIY Compact 3D Printed Animatronic Eye Mechanism project.
https://www.instructables.com/DIY-Compact-3D-Printed-Animatronic-Eye-Mechanism/

The eyes are from 2 halloween doorbells. I took out the eyes and scrape off the paint using a pen knife and paint thinner. And draw the eyes using color pencil.
https://www.amazon.com/Deloky-Halloween-Animated-Doorbell-Decoration/dp/B08GWZ9X5K/

Arduino Mega 2560 ATmega2560 microcontroller board
https://www.aliexpress.com/item/32850843888.html

Arduino MEGA Sensor Shield
https://www.aliexpress.com/item/4001128232648.html

Geekservo
https://www.aliexpress.com/item/1005001419298190.html

Servo extension cable
https://www.aliexpress.com/item/4000242973966.html

Other parts / things I use:
- 1.1mm wire
- string for pulley
- blu tack
- paint thinner
- power bank
- color pencil to draw the eyes

Thanks for watching. If you liked this video, make sure to subscribe for more!

Видео Animatronic Eyes made with Toy Parts and Arduino канала ToyTech Machines