Things You Never Knew About BC547 | All About BC547 | #WowElectric
BC547 Transistor Features ---
1. Bi-Polar NPN Transistor
2. DC Current Gain (hFE) is 800 maximum
3. Continuous Collector current (IC) is 100mA
4. Emitter Base Voltage (VBE) is 6V
5. Base Current(IB) is 5mA maximum
6. Available in To-92 Package
BC547 Equivalent Transistors ---
BC549, BC636, BC639, 2N2222 TO-92, 2N2222 TO-18, 2N2369, 2N3055, 2N3904, 2N3906, 2SC5200, BC548, BC557, BC558
YOU MAY ALSO LIKE 😍
https://www.youtube.com/watch?v=98HugCiS218
Simple Fire Alarm Circuit at Low Cost | BC547
https://www.youtube.com/watch?v=fCpubGhGdfs
5 Arduino projects for beginners anyone can make
https://www.youtube.com/watch?v=G8cvRcHQW1E
Resistor Wattage: What is Power Rating Of A Resistor
https://www.youtube.com/watch?v=Zu31V-aZf3s
What Is TSOP 1738 | TSOP 1738 Working Principle
https://www.youtube.com/watch?v=MUlIuux4Y20
How To Make 230v LED Driver Circuit | AC Powered 220V Led
Simple Fire Alarm Circuit at Low Cost
♦ ♦ RECOMMENDED FOR YOU ♦ ♦
• BREADBOARD 830 Point
https://amzn.to/2KucWu5
• POWER SUPPLY 30V 5A
https://amzn.to/2z7TK48
• JUMPERS
https://amzn.to/2lHOrij
• MULTIMETER Innova 3320
https://amzn.to/2Nor3Dc
• SOLDERING IRON
https://amzn.to/2lOdvV3
• ARDUINO STARTER KIT
https://amzn.to/2u1AO10
• ARDUINO UNO R3
https://amzn.to/2yWZGwH
• ARDUINO NANO V3.0
https://amzn.to/2KwCWF3
• GLUE GUN
https://amzn.to/2KueHvc
• Electrolytic Capacitor (0.1uF--1000uF)
https://amzn.to/2NecC4w
• Resistor (10 Ohm--1M Ohm)
https://amzn.to/2KwyiKv
• Ceramic Capacitor (0.1uF--10uF)
https://amzn.to/2MB8aM8
• SMD RGB LED STRIP (10m)
https://amzn.to/2KHQopO
DISCLAIMER: SOME OF THESE LINKS ARE AFFILIATE LINKS WHERE I'LL EARN A SMALL COMMISSION IF YOU MAKE A PURCHASE. SHOPPING THROUGH THESE LINKS IS A GREAT WAY TO SUPPORT THE CHANNEL SO I CAN KEEP MAKING HELPFUL VIDEOS FOR YOU.
Brief Description on BC547 ---
BC547 is a NPN transistor hence the collector and emitter will be left open (Reverse biased) when the base pin is held at ground and will be closed (Forward biased) when a signal is provided to base pin. BC547 has a gain value of 110 to 800, this value determines the amplification capacity of the transistor. The maximum amount of current that could flow through the Collector pin is 100mA, hence we cannot connect loads that consume more than 100mA using this transistor. To bias a transistor we have to supply current to base pin, this current (IB) should be limited to 5mA.
When this transistor is fully biased then it can allow a maximum of 100mA to flow across the collector and emitter. This stage is called Saturation Region and the typical voltage allowed across the Collector-Emitter (VCE) or Base-Emitter (VBE) could be 200 and 900 mV respectively. When base current is removed the transistor becomes fully off, this stage is called as the Cut-off Region and the Base Emitter voltage could be around 660 mV.
Applications ---
• Driver Modules like Relay Driver
• LED driver
• Amplifier modules like Audio amplifiers
• Signal Amplifier
• Darlington Pair
Related Tags ---
• BC547 transistor description in
colletor
• Description of bc547
• BC547
• Transistor BC547 and BC548 are they
the same?
• 2n222 transistor replacement
• Using bc549 instead of bc547
😇😇😇 😬😬😬
WowElectric On SocialMedia
-- Facebook
https://facebook.com/WowElectricYT
-- Twitter
https://twitter.com/WowElectric
-- Instagram
https://instagram.com/WowElectric
-- Pinterest
https://pinterest.com/WowElectric
#Electronics #Electrical #Projects
Видео Things You Never Knew About BC547 | All About BC547 | #WowElectric канала WowElectric
1. Bi-Polar NPN Transistor
2. DC Current Gain (hFE) is 800 maximum
3. Continuous Collector current (IC) is 100mA
4. Emitter Base Voltage (VBE) is 6V
5. Base Current(IB) is 5mA maximum
6. Available in To-92 Package
BC547 Equivalent Transistors ---
BC549, BC636, BC639, 2N2222 TO-92, 2N2222 TO-18, 2N2369, 2N3055, 2N3904, 2N3906, 2SC5200, BC548, BC557, BC558
YOU MAY ALSO LIKE 😍
https://www.youtube.com/watch?v=98HugCiS218
Simple Fire Alarm Circuit at Low Cost | BC547
https://www.youtube.com/watch?v=fCpubGhGdfs
5 Arduino projects for beginners anyone can make
https://www.youtube.com/watch?v=G8cvRcHQW1E
Resistor Wattage: What is Power Rating Of A Resistor
https://www.youtube.com/watch?v=Zu31V-aZf3s
What Is TSOP 1738 | TSOP 1738 Working Principle
https://www.youtube.com/watch?v=MUlIuux4Y20
How To Make 230v LED Driver Circuit | AC Powered 220V Led
Simple Fire Alarm Circuit at Low Cost
♦ ♦ RECOMMENDED FOR YOU ♦ ♦
• BREADBOARD 830 Point
https://amzn.to/2KucWu5
• POWER SUPPLY 30V 5A
https://amzn.to/2z7TK48
• JUMPERS
https://amzn.to/2lHOrij
• MULTIMETER Innova 3320
https://amzn.to/2Nor3Dc
• SOLDERING IRON
https://amzn.to/2lOdvV3
• ARDUINO STARTER KIT
https://amzn.to/2u1AO10
• ARDUINO UNO R3
https://amzn.to/2yWZGwH
• ARDUINO NANO V3.0
https://amzn.to/2KwCWF3
• GLUE GUN
https://amzn.to/2KueHvc
• Electrolytic Capacitor (0.1uF--1000uF)
https://amzn.to/2NecC4w
• Resistor (10 Ohm--1M Ohm)
https://amzn.to/2KwyiKv
• Ceramic Capacitor (0.1uF--10uF)
https://amzn.to/2MB8aM8
• SMD RGB LED STRIP (10m)
https://amzn.to/2KHQopO
DISCLAIMER: SOME OF THESE LINKS ARE AFFILIATE LINKS WHERE I'LL EARN A SMALL COMMISSION IF YOU MAKE A PURCHASE. SHOPPING THROUGH THESE LINKS IS A GREAT WAY TO SUPPORT THE CHANNEL SO I CAN KEEP MAKING HELPFUL VIDEOS FOR YOU.
Brief Description on BC547 ---
BC547 is a NPN transistor hence the collector and emitter will be left open (Reverse biased) when the base pin is held at ground and will be closed (Forward biased) when a signal is provided to base pin. BC547 has a gain value of 110 to 800, this value determines the amplification capacity of the transistor. The maximum amount of current that could flow through the Collector pin is 100mA, hence we cannot connect loads that consume more than 100mA using this transistor. To bias a transistor we have to supply current to base pin, this current (IB) should be limited to 5mA.
When this transistor is fully biased then it can allow a maximum of 100mA to flow across the collector and emitter. This stage is called Saturation Region and the typical voltage allowed across the Collector-Emitter (VCE) or Base-Emitter (VBE) could be 200 and 900 mV respectively. When base current is removed the transistor becomes fully off, this stage is called as the Cut-off Region and the Base Emitter voltage could be around 660 mV.
Applications ---
• Driver Modules like Relay Driver
• LED driver
• Amplifier modules like Audio amplifiers
• Signal Amplifier
• Darlington Pair
Related Tags ---
• BC547 transistor description in
colletor
• Description of bc547
• BC547
• Transistor BC547 and BC548 are they
the same?
• 2n222 transistor replacement
• Using bc549 instead of bc547
😇😇😇 😬😬😬
WowElectric On SocialMedia
https://facebook.com/WowElectricYT
https://twitter.com/WowElectric
https://instagram.com/WowElectric
https://pinterest.com/WowElectric
#Electronics #Electrical #Projects
Видео Things You Never Knew About BC547 | All About BC547 | #WowElectric канала WowElectric
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How Transistors Work - The Learning Circuitطريقة عمل الترانزستور كمفتاحResistor Wattage: What is Power Rating Of A Resistor | WowElectricCommon-Emitter Configuration of a Transistor3 Useful circuit based on BC547 & LDRTransistors - The Invention That Changed The WorldTTC5200 and TTA1943 transistor for amplifier circuit diagram, how to make amplifier? electronicshow to use your transistor as a switch - simplest way!What is a schottky diode?How to test a transistor using a digital MultimeterSecurity Alarm with LDR | LDR Latch CircuitElectrical Engineering: Ch 3: Circuit Analysis (31 of 37) NPN Transistor: Voltage & Base Currenttransistor as a switch animatedHow to Identify / find out/ check out the Collector Emmitter and Base of TransistorSimple Basic audio Amplifier Circuit using 1 MOSFET Transistorhow to find transistor base emitter collector with multimeter? how to check pnp and npn? electronicsTransistors, How do they work ?Simple Transistor relay circuit | Transistor as a switchHow to select a transistor ??LED chaser lights using transistor bc 547