Insta360 One R with 360 Degree Lens on iFlight Nazgul5 and Protek35 montage

I've been doing some more fiddling around with the Insta360 One R with the 360 degree lens module on my iFlight Nazgul5 v2 and Protek35. However, this is just a montage of the results.

My original explanation is here: https://youtu.be/JfTZC9reETI

In this montage, I've focussed on the options where the camera is mounted to the frame this time, so there are no options with the camera mounted off the frame on the end of an arm (check the original video for that).

The additional options at the end are with the camera rotated 90 degrees relative to the frame so that the stitch line runs through the length of the frame.

My preferred option? I think the rotated version works well on the Protek35, but not the Nazgul5 v2. For the Nazgul5 v2, I probably prefer the vertical camera leaning slightly forward.

What's your preferred option?

List of stuff:
Quad: iFlight Nazgul5 v2 (6s; analogue), iFlight Protek35 (4s; analogue), both with ExpressLRS EP1 2.4GHz receiver
Batteries: GNB 6s 1,100mAh; Tattu R-line v3 6s 1,300mAh; Tattu R-line v3 4s 1,300maH, Tattu Funfly 4s 1,300mAh
Camera: Insta360 One R (360 degree lens module)
Transmitter: RadioMaster TX16s with HappyModel 2.4GHz ExpressLRS Module
FPV Goggles: Fatshark Dominator HD3 with True-D Diversity Receiver

Music:
Hush - "Freaky" [NCS Release]

Видео Insta360 One R with 360 Degree Lens on iFlight Nazgul5 and Protek35 montage канала Firefly-RC