I BUILT MYSELF A CRAZY FATBOB

Join this channel to get access to perks:
https://www.youtube.com/channel/UCZBZRJks1iVbwvQfWMQ-osA/join

I got a chance to build myself a bike!
This is by far, the craziest Fatbob I have ever built & ridden.

Cam Specs: Cycle-Rama CR 540
Intake Opens 25* BTDC
Intake Closes 45* ABDC
Total Intake Duration 250*

Exhaust Opens 69* BBDC
Exhaust Closes 9* ATDC
Total Exhaust Duration 258*

Its a 128ci Alpha Performance Engines Cylinder & Piston kit with 12.0:1 Pistons.
The Heads are from A.P.E too & are their stage 2 heads which have been CNC Ported & come with high lift springs installed. They are still running the stock size valves.
It has a 64mm Throttle body & intake manifold from Screamin' Eagle.
The compensator ramp has been upgraded as well as the clutch springs.
New high capacity lifters from A.P.E went in as well.

The D&D Low cat is my favorite 2-1 pipe on the market because of the performance levels offered from it, but more importantly, the sound!

I decided to put this combo together because I had these parts sitting on the shelf not doing much & it has been a long time since I have used the CR540 Cam.

While it didn't make as much power as I thought it would, it is still VERY FUN to ride & sounds absolutely mental.

I have lots of plans with this bike involving cam swaps & different exhaust pipes to try out on it so Subscribe to the channel so you can stay up to date with the uploads & changes.

Please leave any questions in the comments & I will get back to you asap.

Follow me on Instagram https://www.instagram.com/tommy_twincam_miller/

I work here https://ddhd.com.au/

You can call me on 0746342766 during AEST business hours.
Intro 00:24
Cam Install 1:02
Centering Oil Pump 1:22
Lifter Cuffs 2:11
Ring Gaps 2:55
Pistons On 4:18
Cylinder Sealant 4:35
Cylinder Heads 6:01
Installing Heads 6:47
First Start Up 7:16
Pre Dyno Talk 9:28
Dyno Runs 10:36
Dyno Graph 11:19
Skids 13:18
Outro 14:00

Видео I BUILT MYSELF A CRAZY FATBOB канала Master Tech Miller