Drag Chains for the Onefinity CNC
Making Drag Chains for cable/coolant management on the Onefinity CNC.
Uses 90deg aluminum extrusion: 3/4" x 8' x 1/16" thick
Drag Chains are 15x40mm.
Hardware is M4.
STL files on Thingiverse for Non-Commercial use only: https://www.thingiverse.com/thing:4619804
Shapeways: https://www.shapeways.com/shops/muddyfeet-designs
Видео Drag Chains for the Onefinity CNC канала Kevin M
Uses 90deg aluminum extrusion: 3/4" x 8' x 1/16" thick
Drag Chains are 15x40mm.
Hardware is M4.
STL files on Thingiverse for Non-Commercial use only: https://www.thingiverse.com/thing:4619804
Shapeways: https://www.shapeways.com/shops/muddyfeet-designs
Видео Drag Chains for the Onefinity CNC канала Kevin M
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Onefinity Wire Managment update
Adding T Track Clamps Wasteboard Upgrade to the Onefinity CNC via Two Moose Design
Onefinity CNC Vacuum Hose Boom
Woodworking: Making Fisher's Mobile Assembly Table
MakerDan's DrawBot for the OneFinity CNC
Onefinity- laying out your spoilboard
Ultimate CNC Enclosure Build Video! // How To
OneFinity CNC with 5 Upgrades
OneFinity CNC Machine // Unboxing & Setup
Getting sideways with the Onefinity CNC
Setting Up The JTech 7w Laser
Getting started with your Onefinity
5 CNC Projects You Can Make On The Onefinity CNC - Two Moose Design
creating a jig on the Onefinity Cnc
Onfinity CNC for Beginners Episode 1 Setting Home vs Zero
OneFinity CNC WasteBoard Creation and Surfacing | Beats Flow | Part 3 of 3
Onefinity Spoilboard
How To Install A CNC Spindle - Part 1
The VCarve Inlay Technique
Assembling The Suck It Dust Boot