NewBeeDrone Savage Bee - Runcam Nano 3 - First flight's outdoors. Flight 4

Flight 4 or 4. This is a largely bone stock Savage Bee 1S build. I only changed 3 things, parts list below. This is also raw right off the googles DVR to hopefully preserve what image quality you can get from DVR video but I've used YouTube to remove the audio since it's just a really loud buzzing.

Thoughts: I'm far FAAAAAAR from a pro at FPV pilot. In Acro/Air Mode I think it flys pretty great. Punch seems.. OK to reasonable. Like others have pointed out the bottleneck seems to be the PH2.0 connector. Getting it to calibrate so it hovers with almost no input in Angle/Horizon mode indoors seems to be difficult for me, but honestly this should always be flown in acro/air mode outdoors.

There is also some shaking in the DVR but it wasn't really noticeable under the goggles. There is also a little bit of jitter on the OSD, it's not... great, but it's totally serviceable.

Finally the camera. The stock BeeEye that this kit comes with IMO is not great for outdoor flying. It's great on a Whoop flying it indoors. I saw the DVR video of Savage Bee's flying outdoors on YouTube and decided I wanted to try something else. I also own a new AcroBee BL V2 Whoop and really like it, but I might try swapping it out on the Whoop as well. Even though the RunCam Nano 3 is the same size as the BeeEye, I was unable to use the stock mount. Instead I used hot glue.

Stock Savage Bee 1S kit
Changed things:
White Goober Canopy
RunCam Nano 3
BetaFPV Solid Core PH2.0 pigtail.

Everything else stock:
Savage Bee Frame
Gemfan 3018 1.5mm shaft props
NBD 1202 11420K "Flow Motors"
BeeBrain Brushless V1 FC
FrSky SPI D8

Battery: GNB PH2.0 600mAh 1S Battery

Radio: FrSky Q X7S Access + Multiprotocol Module

Видео NewBeeDrone Savage Bee - Runcam Nano 3 - First flight's outdoors. Flight 4 канала Kiteless