Xerox Alto Restoration Part 5 - hooking up the logic analyzer
Last time we confirmed that the processor was running microcode and switching tasks. It's time to hook up the logic analyzer and look into more details into what's happening during the boot sequence. Ken Shirriff's detailed blog post about this session can be found here:
http://www.righto.com/2016/09/xerox-alto-restoration-day-5-smoke-and.html
Видео Xerox Alto Restoration Part 5 - hooking up the logic analyzer канала CuriousMarc
http://www.righto.com/2016/09/xerox-alto-restoration-day-5-smoke-and.html
Видео Xerox Alto Restoration Part 5 - hooking up the logic analyzer канала CuriousMarc
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Xerox Alto Restoration Part 6 - debug leads us to a failed ICAlto Restoration Part 18 - We crash our disk drive. Mill to the rescue!Xerox Alto Restoration Part 1 - power supply restoration, disk drive surpriseIBM System/360 Front PanelAE#8 Hewlett Packard 16500C Logic Analyzer Repair and DemoXerox Alto Restoration Part 8 - Alto finally bootsXerox Alto Restoration Part 4 - first signs of processor lifeXerox Alto Restoration Part 12 - Ethernet pioneers and the first optical mouseXerox Alto Restoration Part 15 - Ethernet mysteries solved, Alto back in one pieceHP 9825 Repair Part 3: HP Logic Analyzer to the RescueXerox Alto Restoration Part 10 - solving the crashes, first look at the GUIDocumation Punched Card Reader Part 2 - Using the vintage HP 1670G Logic AnalyzerIBM 3420 9-track tape drives arrrive for restoration. 800 lbs each!Digibarn Alto Part 5: It boots again!Apollo DSKY panel relight: the full storyFixing the C16 and getting disk I/O workingXerox Alto Restoration Part 7 - developing tools while waiting for new boot diskTeletype Model 19 Part 13: Table rewiring and putting the teletype all back together!