[09] RuiDa Controller - Configuration Vendor Tools - RD Works
This quick guide can be used for setting up your RuiDa Controller with your Co2 Laser, either if it is new or if you have just upgraded or replaced your laser controller, or in the unfortunate event that your controller has reverted to default factory settings and you don’t have a backup copy of the vendor settings. For whatever reason you need to reconfigure your controller the process is the same.
In this video I explain the majority of settings used to configure your controller using the vendor tools in RD Works Version 8
MW Laser Membership and Support - Now Available at https://www.buymeacoffee.com/mwlaser
RuiDa Controllers are available from Cloudray Laser.
https://s.click.aliexpress.com/e/_9wqJ0D
https://amzn.to/34NEAib
The Co2 Laser Controller used in this video is the Clouday Ruida RDC6432 CO2 Laser Controller System for Laser Engraving Cutting Machine - https://s.click.aliexpress.com/e/_A9BTH7
RuiDa Technology - https://www.rd-acs.com
This channel does not currently have any paid sponsorship, therefore affiliate links and donations to my channel help me financially and allow me to continue with the production of new video content.
Looking for Stepper Motors and Drivers for Your 3D Printer, Laser Machine, CNC, Robotics or other project ? Check out...
STEPPERONLINE - https://www.omc-stepperonline.com//?tracking=5f7ce36148d79
Thanks for Visiting.
Until next time, take care
Cheers Matthew
Visit MW Laser - https://www.mwlaser.com.au
Instagram https://www.instagram.com/mattsworkshop_mwlaser/
https://www.facebook.com/groups/mwlaser
== If you'd like to support my channel financially so I can continue to produce content you can do via PayPal here --- https://www.paypal.me/mattsworkshop --- Thank You ====
NOTE: This is not a paid production or advertisement. The featured Tutorial was requested by Cloudray & RuiDa
Видео [09] RuiDa Controller - Configuration Vendor Tools - RD Works канала MW Laser
In this video I explain the majority of settings used to configure your controller using the vendor tools in RD Works Version 8
MW Laser Membership and Support - Now Available at https://www.buymeacoffee.com/mwlaser
RuiDa Controllers are available from Cloudray Laser.
https://s.click.aliexpress.com/e/_9wqJ0D
https://amzn.to/34NEAib
The Co2 Laser Controller used in this video is the Clouday Ruida RDC6432 CO2 Laser Controller System for Laser Engraving Cutting Machine - https://s.click.aliexpress.com/e/_A9BTH7
RuiDa Technology - https://www.rd-acs.com
This channel does not currently have any paid sponsorship, therefore affiliate links and donations to my channel help me financially and allow me to continue with the production of new video content.
Looking for Stepper Motors and Drivers for Your 3D Printer, Laser Machine, CNC, Robotics or other project ? Check out...
STEPPERONLINE - https://www.omc-stepperonline.com//?tracking=5f7ce36148d79
Thanks for Visiting.
Until next time, take care
Cheers Matthew
Visit MW Laser - https://www.mwlaser.com.au
Instagram https://www.instagram.com/mattsworkshop_mwlaser/
https://www.facebook.com/groups/mwlaser
== If you'd like to support my channel financially so I can continue to produce content you can do via PayPal here --- https://www.paypal.me/mattsworkshop --- Thank You ====
NOTE: This is not a paid production or advertisement. The featured Tutorial was requested by Cloudray & RuiDa
Видео [09] RuiDa Controller - Configuration Vendor Tools - RD Works канала MW Laser
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
RDWorks Learning Lab 77 Vendor and User Files[02] RuiDa Controller - Establishing Connections - PC-USB - Ethernet - USB DiskUltimate Air Assist Upgrade for Co2 Laser RUIDA 644X Controllers - CNC Co2 Laser Machine[07] RuiDa Controller - RD Works - Cut OptimizationUnderstanding Minimum power settings in lightburnCo2 Laser Troubleshooting Guide - Troubleshooting Poor Cut QualityLightburn 101 - Starting Position, Origins, and Homing[03] Ruida - Using RD Works for the 1st TimeEp4: Starting the Electronics. The DIY CO2 Laser Cutter / Engraver Build SeriesUsing Lightburn Print & Cut for Double Sided Engraving[04] RuiDa Controller - RD Works - Setting Layer Parameter & Parameter LibraryCo2 Laser, AIR COMPRESSOR Upgrade, Setup & Testing, With Ultimate Air AssistRDWorks Learning Lab 154 Head Re-transplant Mk2ACutting a single project larger your laser (pass-through version)How to setup and use a laser cutter with RD WorksEp6: Laser Beam Mirror Alignment. The DIY CO2 Laser Cutter / Engraver Build SeriesRDWorks Learning Lab 214 Setting Z to a New Zero Position[08] RuiDa Controller - Calibration of X and Y Axis for CNC Co2 Laser - RD WorksCo2 Laser Upgrade - Laser & Red Dot Beam Combiner for CNC Co2 Laser Machine