Hobart N50 Regrease Walkthrough pt. 2

Welcome to Mr. Mixer! We finished up disassembling the Hobart N50 in pt. 1 so now we're ready to get it regreased and put back it all back together. We hope this walkthrough helps!

Is your mixer in need of repair?
We Also accept shipments, more info on our website!
Mr. Mixer store: https://www.mrmixer.store/shipping
--------------------------------------------------------------------------------------------

Mr. Mixer store: https://www.mrmixer.store/
Facebook: https://www.facebook.com/Mrmixer316/
TikTok: https://www.tiktok.com/@mr..mixer?is_...
Instagram: https://www.instagram.com/mr._mixer_/

0:00 Intro
0:21 Start regreasing
3:30 Regreasing center gear
4:40 Reattach transmission hub
4:45 Speed change lever
4:59 Remounting transmission
5:52 Tighten housing screws
6:46 Reinstall switch plate
7:40 Keep your screws separated
8:04 Test your knob
8:20 Reinstall back plate
9:15 Install back plate nuts
9:51 Reattach clips
10:28 Reinstall back cap
12:22 Testing the mixer
13:28 Testing the other mixer
14:12 Remove the drip ring
15:11 Remove planetary pin
15:59 Inspect planetary
17:16 Reinstall planetary
17:52 Reinstall planetary pin
18:51 Outro

Видео Hobart N50 Regrease Walkthrough pt. 2 канала Mr. Mixer