Hobart N50 Regrease Walkthrough pt.1

Welcome to Mr. Mixer! In this series we'll be walking you through and full teardown and regreasing of the Hobart N50 commercial mixer, as well as fixing a few other issues along the process.

Is your mixer in need of repair?
We Also accept shipments, more info on our website!
Mr. Mixer store: https://www.mrmixer.store/shipping
--------------------------------------------------------------------------------------------

Mr. Mixer store: https://www.mrmixer.store/
Facebook: https://www.facebook.com/Mrmixer316/
TikTok: https://www.tiktok.com/@mr..mixer?is_...
Instagram: https://www.instagram.com/mr._mixer_/

0:00 Intro
0:18 A look at the mixer
0:51 Diagnosing the issues
1:52 Start the disassembly
2:38 Wire nuts
3:01 Remove other mixer back cap
3:25 Remove rear bracket
4:29 Locate the housing screws
5:06 Remove face plate
5:58 Check the insulating sleeve
6:59 Remove front housing
7:11 Unveiling the grease
7:30 Motor housing
7:51 Rouge washer
8:07 Second mixers engine housing
8:35 Begin degreasing
9:00 Disassemble transmission
9:22 Cleaning transmission
10:13 Inspect speed change gear cluster
10:42 Remove gear cluster
12:26 Reinstall gear cluster

Видео Hobart N50 Regrease Walkthrough pt.1 канала Mr. Mixer