Push vs Pull: Flux Core Edition

In the last episode we did a push vs pull test with spray arc MIG where we did a cut and etch to examine if the travel angle made a difference. Today we are doing a similar test with Gas shielded flux core welding. We had some comments in the previous video that wanted us to test it at a more drastic angle, so in this video we are raising the stakes and doing both tests at a 25 degree angle.
VISIT OUR WEBSITE: https://www.weld.com
FOLLOW US ON INSTAGRAM: https://instagram.com/welddotcom
JOIN THE FACEBOOK GROUP - https://www.facebook.com/groups/welddotcom/
Talk with Bob, Jason and Mancub!

------------------------------------------------

EQUIPMENT WE LIKE AND USE IN THE SHOP:
CANTESCO ANTI SPATTER SPRAY: http://cantesco.net/en/home/
WEILER ABRASIVES: http://weilercorp.com
SELECT ARC WIRE: http://www.select-arc.com
PFERD ABRASIVES: http://www.pferdusa.com
ESAB POWER SOURCES: http://www.ESAB.com
EVERLAST POWER SOURCES: http://www.everlastgenerators.com
AHP POWER SOURCES: http://www.ahp.com
TAB AND SLOT WELDING TABLES: http://www.tabandslot.com
VIDEO SCHEDULE:
MONDAY @ 5:30 PM ET
WEDNESDAY @ 5:30 PM ET
FRIDAY @ 5:30 PM ET

Weld.com is a dedicated to helping you build your career as a welder / fabricator. Whether you’re a hobbyist, student or active in the trade; we are here to help further your craft. If you want to keep learning and interacting with us, make sure you hit that subscribe and notify (bell) button. Join us in the comment section after each video. If you have questions on projects or tests you’re doing now, head over to the Facebook group so you can share pictures with us and get feedback from the community.

FACEBOOK GROUP - https://www.facebook.com/groups/welddotcom/
#welddotcom
Disclaimer: Weld.com is compensated for providing links in our descriptions. However, we only work with companies that we use ourselves and can honestly and ethically recommend to our audience.

Видео Push vs Pull: Flux Core Edition канала Weld.com