MIG Inductance & Push Vs. Pull Techniques | Welding Tips & Tricks #Welding #MIG #Techniques
Inductance is a setting available on certain MIG welding machines. One really practical use I have found for inductance settings is when you want to use a very low wire speed setting. Visit my store at https://weldmongerstore.com for TIG Fingers, DVDs, and other quality welding tools.
A high inductance setting allows for using very low wire speed settings, while still maintaining a stable and spatter free arc. For coped tubing joints where its difficult to weld quickly, this really helps to slow the travel speed down to a point where its easier to position your body as you weld. Being able to set inductance is also helpful for achieving the "MIG like TIG" stack-of-dimes look on outside corner joints.
Subscribe to my channel for more weekly videos.
https://www.youtube.com/user/weldingtipsandtricks?sub_confirmation=1
check out my Amazon recommended products page at https://www.amazon.com/shop/weldingtipsandtricks
Follow Welding Tips & Tricks on social media to see what I’m up to:
Instagram: https://www.instagram.com/weldmonger/
Facebook: https://www.facebook.com/weldingtipsandtricks
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
http://forum.weldingtipsandtricks.com
Видео MIG Inductance & Push Vs. Pull Techniques | Welding Tips & Tricks #Welding #MIG #Techniques канала weldingtipsandtricks
A high inductance setting allows for using very low wire speed settings, while still maintaining a stable and spatter free arc. For coped tubing joints where its difficult to weld quickly, this really helps to slow the travel speed down to a point where its easier to position your body as you weld. Being able to set inductance is also helpful for achieving the "MIG like TIG" stack-of-dimes look on outside corner joints.
Subscribe to my channel for more weekly videos.
https://www.youtube.com/user/weldingtipsandtricks?sub_confirmation=1
check out my Amazon recommended products page at https://www.amazon.com/shop/weldingtipsandtricks
Follow Welding Tips & Tricks on social media to see what I’m up to:
Instagram: https://www.instagram.com/weldmonger/
Facebook: https://www.facebook.com/weldingtipsandtricks
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
http://forum.weldingtipsandtricks.com
Видео MIG Inductance & Push Vs. Pull Techniques | Welding Tips & Tricks #Welding #MIG #Techniques канала weldingtipsandtricks
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Mig Welding Basics 2PUSH vs. PULL MIG Welding | Cut and Etch🔥 What Does Inductance Actually Do?HOW TO MIG LIKE TIG WELD (Stacking Dimes) W/ OVERKILLRACINGANDCHASSIS w/ *Tips and Techniques*SHOULD YOU PUSH OR PULL A MIG WELD? FLAT OR RIPPLE BEAD?Searching for the Perfect Stack of Dimes! Everlast Lightning 225🔥 Walking the Cup with MIG: Downhill Root, Uphill Fill and Cap | MIG MondayMIG Welding Technique Push vs Drag: Part 2 - Penetration Test | MIG Monday3 Flux Core Myths DEBUNKEDPush vs Pull: Flux Core EditionMiller Multimatic 220 AC/DC Mig Welding TechniquesMig Welding BasicsLessons from My First Welding JobHow NOT TO Weld: Most Common MIG Welding Mistakes (Everlast PowerMTS)Stringers vs WeavesGMAW-S 3G Test PlateMIG Welding Wire Speed and PenetrationMig Settings Cut and EtchedMig Welding 45° Square Tubing4 Types of Welding Explained: MIG vs TIG vs Stick vs Flux Core