Загрузка страницы

Two-Part Clay-Up Mold Vs. One-Piece Cut Mold

In this video I make urethane resin castings of a collectible figurine. I cut the silicone mold open and build a casting cradle to help close the mold properly. Then I cast the resin copy.
This video is Part 2 continued from this video:
https://youtu.be/kShb32kjxOI

For more fun with resin wrestling figurines check out Zaash on The Figure Guys: https://youtu.be/eQ_pg1 DJpiw

Here is a list of suppliers for the rubber, resins and waxes I use in my videos:
https://www.dropbox.com/s/kz6mhmf7v5vpy7l/Material%20and%20Suppliers.pdf?dl=0

Do you have a project to suggest for the channel?
Here’s a .pdf with everything you need to know:
https://www.dropbox.com/s/pjb0l6fr7zjttec/YouTube%20Collaboration.pdf?dl=0

Видео Two-Part Clay-Up Mold Vs. One-Piece Cut Mold канала Robert Tolone
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
19 марта 2021 г. 22:00:29
00:21:11
Яндекс.Метрика