Making a Dovetail Saw

In this video I make a dovetail saw from scratch. I used an old cheap saw and filed all the teeth down and made them myself.

This is also an entry to Toolmake16:
Link to website article: http://www.womadeod.co.uk/p/blog-page_3.html
Launch video for rules: https://www.youtube.com/watch?v=uVqnXJ6lXMQ

The template for the handle and the teeth can be found here:

http://www.blackburntools.com/index.html

At the begining of the video when I'm filling the saw plate flat you can see some deep cuts in the back of the saw. That is because I tried using the Paul Sellers method to cut the teeth but the saw plate is too hard to cut using a hacksaw.

I used two pieces of 3mm thick brass and I filed a groove in them so that they would sandwich the plate and be flush at the top. The scraper that you see in the video is the one I made really quickly using a piece of carbide that I was able to bevel roughly using an angle grinder with a diamond wheel.

The saw plate was so hard that I had to use carbide masonry drill bit to drill through it.

The wood for the handle is oak.

Thanks for watching and please like, comment, subscribe and share.

Видео Making a Dovetail Saw канала Martin