Cheap 3D Printers THAT DON'T SUCK $350 and under
Want to get into 3D Printing but don't have much money to spend? There are a lot of low cost 3D Printers now available but not many are very good!
In this video I share with you my choices for 3D Printers $350 USD or under that actually work pretty good, and would be a great start into 3D Printing.
These machines are either those that have been tested here on Maker's Muse - or come highly recommended by others in the 3D Printing community.
IMPORTANT! This video is purely my opinion based on my experience - you are responsible for your own decisions!
This video has not been sponsored or affected in any way by any suppliers or manufacturers. The decision to include or exclude any machines from this video is my own. Links to the machines are listed below as well as the communities and reviews mentioned in the video - none have tracking or affiliates attached. Happy printing!
Cetus - https://www.cetus3d.com/
Maker's Muse pre-production review - https://youtu.be/mnTiSZJdN34
That 3D Print Guy's production review - https://youtu.be/D_i3vAV7EJ4
Trinus - http://www.trinus3d.com/
Trinus pre-production review - https://youtu.be/uTEqnEtqJHw
MP Select Mini (V1) -
Chuck Helleybuck's MP Select Mini V1 Review - https://youtu.be/h9rYZOM0Zic
Tronxy X1 - http://www.gearbest.com/3d-printers-3d-printer-kits/pp_494192.html
Press Reset's Tronxy X1 review - https://youtu.be/XEt1zCULBQc
Balco (for Australians) - https://www.kogan.com/au/buy/balco-3d-printer-with-4-x-free-filaments-and-print-mat-balco/
Monoprice Maker Select V2 - https://www.monoprice.com/product?p_id=13860
Hobbyking Fabrikator Mini 2 - Not available yet
---
Like what we do?
Visit us at makersmuse.com for more information about Makers Muse!
Say G'day to us on Twitter and Instagram @makersmuse
Ways you can support Maker's Muse:
-Want to buy a 3D Printer but don't know where to start? Get our eBook here!
https://gumroad.com/products/NBvg/
- Support us on Patreon
https://www.patreon.com/makersmuse?ty=h
-Buy a T-shirt!
http://www.redbubble.com/people/makersmuse/shop
- By using our amazon affiliate links
US - http://amzn.to/1Ym50j1
UK - http://amzn.to/1PJICdR
Or a direct donation through Youtube
And lastly, a BIG thanks to the community, and those who have supported us here at Makers Muse!
----
Видео Cheap 3D Printers THAT DON'T SUCK $350 and under канала Maker's Muse
In this video I share with you my choices for 3D Printers $350 USD or under that actually work pretty good, and would be a great start into 3D Printing.
These machines are either those that have been tested here on Maker's Muse - or come highly recommended by others in the 3D Printing community.
IMPORTANT! This video is purely my opinion based on my experience - you are responsible for your own decisions!
This video has not been sponsored or affected in any way by any suppliers or manufacturers. The decision to include or exclude any machines from this video is my own. Links to the machines are listed below as well as the communities and reviews mentioned in the video - none have tracking or affiliates attached. Happy printing!
Cetus - https://www.cetus3d.com/
Maker's Muse pre-production review - https://youtu.be/mnTiSZJdN34
That 3D Print Guy's production review - https://youtu.be/D_i3vAV7EJ4
Trinus - http://www.trinus3d.com/
Trinus pre-production review - https://youtu.be/uTEqnEtqJHw
MP Select Mini (V1) -
Chuck Helleybuck's MP Select Mini V1 Review - https://youtu.be/h9rYZOM0Zic
Tronxy X1 - http://www.gearbest.com/3d-printers-3d-printer-kits/pp_494192.html
Press Reset's Tronxy X1 review - https://youtu.be/XEt1zCULBQc
Balco (for Australians) - https://www.kogan.com/au/buy/balco-3d-printer-with-4-x-free-filaments-and-print-mat-balco/
Monoprice Maker Select V2 - https://www.monoprice.com/product?p_id=13860
Hobbyking Fabrikator Mini 2 - Not available yet
---
Like what we do?
Visit us at makersmuse.com for more information about Makers Muse!
Say G'day to us on Twitter and Instagram @makersmuse
Ways you can support Maker's Muse:
-Want to buy a 3D Printer but don't know where to start? Get our eBook here!
https://gumroad.com/products/NBvg/
- Support us on Patreon
https://www.patreon.com/makersmuse?ty=h
-Buy a T-shirt!
http://www.redbubble.com/people/makersmuse/shop
- By using our amazon affiliate links
US - http://amzn.to/1Ym50j1
UK - http://amzn.to/1PJICdR
Or a direct donation through Youtube
And lastly, a BIG thanks to the community, and those who have supported us here at Makers Muse!
----
Видео Cheap 3D Printers THAT DON'T SUCK $350 and under канала Maker's Muse
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Creality Ender 3 Full Review - Best $200 3D Printer!My TOP 3D Printers for the 2019 Maker's Muse Studio (FDM/FFF)Ten things I wish I knew before buying a 3D Printer3D Printers UNDER $400 from AliexpressBest 3D Printers from $200 to $1,000,000 (Yes, 1 Million Dollars!) 20185 Best Budget 3D Printers in 2020MP Select Mini v2 How ToStop Ender 3 Stringing with this One Weird Trick! (ok but seriously)The "BEST" 3D Printers for Beginners! My top picks for 2019Creality Ender 3 ReviewRevised: 3D Printing - 13 Things I Wish I Knew When I Got StartedFirst 24 Upgrades & Mods for my Ender 3 Pro10 Best Cheap 3D Printers for Beginners To Print AnythingDirect Drive 3D Printers in 2020 // Artillery Sidewinder X1, Artillery Genius, Sovol SV01 MEGAREVIEWHow to STOP Elephant's Foot on your 3D PrintsIs the Creality Ender 3, Pro?Monoprice Mini Delta review -Ender 3 V2 vs BIQU B1 - Battle of the upgraded Ender 3s3D Printing Basics: Choosing a printer! (Ep2)Anycubic Photon 3D Printer Review