WiFi curtain controller with rogue live wire
I was told about this exciting feature by Michael who had touched the antenna wire end while setting the device up. The button for programming it is right next to the wire, so it's easy to do.
Most devices like this have a bit of sleeve over the wire end to protect against accidental contact. With a bare live wire hanging out the risk of it coming into contact with adjacent metalwork is also high, and that could either short to ground, destroying the module, or potentially give someone a shock from random metal that shouldn't have posed a risk.
If you have one of these I would recommend adding a bit of insulating sleeve or tape to the end of the wire making sure the power is off when you do so. Even when used in a plastic enclosure there is a risk of getting a shock when changing the program settings.
Given that the rest of the module seems a relatively sensible design the omission of insulation seems a bit odd.
The unit is only intended to switch low current loads, so the circuitry looks relatively acceptable for that.
In hindsight, the resistor on the input circuitry may be to make it less sensitive to capacitively coupled current to the switch wires. By having a resistor there it poses a slight load that will shunt stray current. The zener may be purely to protect the capacitor from overvoltage.
I specifically avoid using intrusive mid-run video adverts, which means I don't earn as much from my content as other YouTubers.
If you enjoy these videos you can help support the channel with a dollar or two for coffee, cookies and random gadgets for disassembly at:-
https://www.patreon.com/bigclive
Patreon supporters get early access to advert-free videos as they are made, and also regular live streams.
This also keeps the channel independent of YouTube's advertising algorithms allowing it to be a bit more dangerous and naughty.
Other contribution options are available at:-
http://www.bigclive.com/coffee.htm
#ElectronicsCreators
Видео WiFi curtain controller with rogue live wire канала bigclivedotcom
Most devices like this have a bit of sleeve over the wire end to protect against accidental contact. With a bare live wire hanging out the risk of it coming into contact with adjacent metalwork is also high, and that could either short to ground, destroying the module, or potentially give someone a shock from random metal that shouldn't have posed a risk.
If you have one of these I would recommend adding a bit of insulating sleeve or tape to the end of the wire making sure the power is off when you do so. Even when used in a plastic enclosure there is a risk of getting a shock when changing the program settings.
Given that the rest of the module seems a relatively sensible design the omission of insulation seems a bit odd.
The unit is only intended to switch low current loads, so the circuitry looks relatively acceptable for that.
In hindsight, the resistor on the input circuitry may be to make it less sensitive to capacitively coupled current to the switch wires. By having a resistor there it poses a slight load that will shunt stray current. The zener may be purely to protect the capacitor from overvoltage.
I specifically avoid using intrusive mid-run video adverts, which means I don't earn as much from my content as other YouTubers.
If you enjoy these videos you can help support the channel with a dollar or two for coffee, cookies and random gadgets for disassembly at:-
https://www.patreon.com/bigclive
Patreon supporters get early access to advert-free videos as they are made, and also regular live streams.
This also keeps the channel independent of YouTube's advertising algorithms allowing it to be a bit more dangerous and naughty.
Other contribution options are available at:-
http://www.bigclive.com/coffee.htm
#ElectronicsCreators
Видео WiFi curtain controller with rogue live wire канала bigclivedotcom
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Universal fan control module teardown - with schematicI bought the WORST fairy lights on eBay (so far)Fixing a faulty LSPA7 smart plug (XiangHeWang)Modifying Temu LED bulbs - really neat circuitrySimple HEPA air cleaner teardownExpress IKEA USB reviewIKEA SMÅHAGEL USB charger teardownMercedes Benz ceiling lightMoonshine vs Sodastream - with SCIENCE!eBay fake product explodes and goes on fireALDI/Ferrex mechanical drill teardownGhost repelling off-grid deviceReverse engineering the CORE CLH200 (it's awesome)Cheap power pack with free lithium cells (USB or solar charging)Two wire flasher module teardown with unexpected findHeater scam"Miracle" heater teardown - with schematicsFake product with stolen software? (with schematic)Hackable Halloween poopWorst fake Eco OBD2 fuel saver yet (with schematic)Inside a magnetically coupled fermentation agitator