Lyric SIXCT: Installation on a Sliding Door

This video tutorial will explain how to install the Honeywell Lyric SIXCT door sensor to your sliding glass door.

Honeywell Lyric Controller: http://alrm.gd/lyric-controller
Get Monitored: http://alrm.gd/get-monitored

Honeywell releases the Lyric system SIXCT door and window sensor, which is quite possibly the most advanced door and window sensor on the market. This video will show you how to install the sensor on your sliding door.

The new Lyric security system from Honeywell has all new technology for all in one wireless home protection. All of the sensors are battery operated and have full supervision which will give you complete control of your entire home defense system.

The SIXCT door and window sensor is a mini computer that is able to receive wireless firmware updates through the secure connection. The look of the sensor matches the look of the lyric system which allows for aesthetic appearance and a low profile.

The Lyric SIXCT is a bit larger than the previous series door sensors, however, with wireless technology, signal encryption, built in thermistor and a longer rage, these are the most popular door and window sensors on the market.

Installing the sensor to the wall is made easy with a removable back plate that slide-locks in place. Removing the back plate allows for simple installation and mounting. Using the included wall anchors and screws you can quickly add door and window open detection to your existing Lyric security system.

When mounting the sensor it is important to try and mount the magnet on the door itself and have the sensor on the frame. This will prevent damage to the sensor from constant vibrations when closing the door.

Installation is very simple. Follow along with the video to see how to install your Lyric SIXCT door sensor to your door. Ensure that the mounting surfaces are clean from dust, dirt and debris, and are dry.

As the video will show, the first step is to remove the back plate from the sensor. You can use this as a template for marking the screw holes. It is advised to use the screws to mount the sensor whenever possible.

In some instances, such as shown in the video, you must mount to the glass, and must use the tape.

Remove the backing from the double sided tape and position carefully on the door edge or directly on the glass. Make sure there is enough room for the magnet to set and also allow enough room to eliminate direct contact that could dislodge or knock off the sensor from the mount.

Once the back plate is secure, slide the sensor into place. The only step left is to mount the magnet. In this example we are using the double sided tape. If you have a wooden door, you can use the screw mount option as well.

As you will see in the video, once everything is in place you just test the sensor by opening the door a few times to ensure the sensor reports the door opening to the control panel.

Видео Lyric SIXCT: Installation on a Sliding Door канала Alarm Grid