1-Week Chevy C10 Truck Build and Road Trip-Part 3: Finnegan's Garage Ep.134
It's starting to look like a truck again! We now have the cab set in place, the radiator installed and most of the plumbing is finished. There's still a lot of fabrication ahead of us and a mountain of wiring left but we are trucking toward our goal of building this truck in less than a week and then cruising it to MRC Fabrication in Kernersville, North Carolina. We are going to drive it there on Sunday March 7th to go check out the progress on my 1961 Cadillac Coupe DeVill. You guys are welcome to meet us there if you want. The address is 616 Indeneer Drive, Kernersville, NC 27284.
We are going to upload several more videos to the channel this week and those videos have been made possible by the good folks at Wire Care. Wire Care distributes everything you need to wire and plumb your hot rod, muscle car, truck, drift car or tricycle and we are using everything from battery cable to heat shielding products during the thrash to finish my C10. Want to see more? Visit https://www.wirecare.com
There's also bonus daily content on Wirecare's Instagram account, which is @wirecare_inc and Wirecare's YouTube channel:
Like the tools we used in this video? You can find them here:
Transfer Punches can be found on Amazon.com
Gasket Punches: https://www.harborfreight.com/9-piece-hollow-punch-set-3838.html
Holley Terminator X Max: https://www.holley.com/products/fuel_systems/fuel_injection/terminator_x/terminator_x_and_x_max_gen_v_lt_direct_injection_kits/terminator_x_max_gen_v_lt_direct_injection_kits/parts/550-1630
Holley 12-147 fuel pump: https://www.holley.com/products/fuel_systems/fuel_pumps_regulators_and_filters/fuel_pumps/efi_fuel_pumps/fuel_cell_efi_fuel_pump_modules/parts/12-147
Summit Racing fender cover:https://www.summitracing.com/parts/sum-3619?seid=srese1&gclid=Cj0KCQiAyoeCBhCTARIsAOfpKxi7v-ULqG4W_f_z29jD7J9hzJOYjpxetIVUA371klbbG3LPgvsAMaAaAufBEALw_wcB
Want some Finnegan Speed and Marine swag? Go here: https://www.fsmgarage.com
thanks for watching and supporting this channel!
-Finnegan
Видео 1-Week Chevy C10 Truck Build and Road Trip-Part 3: Finnegan's Garage Ep.134 канала Finnegan's Garage
We are going to upload several more videos to the channel this week and those videos have been made possible by the good folks at Wire Care. Wire Care distributes everything you need to wire and plumb your hot rod, muscle car, truck, drift car or tricycle and we are using everything from battery cable to heat shielding products during the thrash to finish my C10. Want to see more? Visit https://www.wirecare.com
There's also bonus daily content on Wirecare's Instagram account, which is @wirecare_inc and Wirecare's YouTube channel:
Like the tools we used in this video? You can find them here:
Transfer Punches can be found on Amazon.com
Gasket Punches: https://www.harborfreight.com/9-piece-hollow-punch-set-3838.html
Holley Terminator X Max: https://www.holley.com/products/fuel_systems/fuel_injection/terminator_x/terminator_x_and_x_max_gen_v_lt_direct_injection_kits/terminator_x_max_gen_v_lt_direct_injection_kits/parts/550-1630
Holley 12-147 fuel pump: https://www.holley.com/products/fuel_systems/fuel_pumps_regulators_and_filters/fuel_pumps/efi_fuel_pumps/fuel_cell_efi_fuel_pump_modules/parts/12-147
Summit Racing fender cover:https://www.summitracing.com/parts/sum-3619?seid=srese1&gclid=Cj0KCQiAyoeCBhCTARIsAOfpKxi7v-ULqG4W_f_z29jD7J9hzJOYjpxetIVUA371klbbG3LPgvsAMaAaAufBEALw_wcB
Want some Finnegan Speed and Marine swag? Go here: https://www.fsmgarage.com
thanks for watching and supporting this channel!
-Finnegan
Видео 1-Week Chevy C10 Truck Build and Road Trip-Part 3: Finnegan's Garage Ep.134 канала Finnegan's Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
THE 1-WEEK CHEVY C10 BUILD AND ROAD TRIP-PART 4: FINNEGAN'S GARAGE EP.135Chevy LUV Inhales Nitrous for A full Minute and Melts the Exhaust! Finnegan's Garage Ep.126A Blown Ramp Truck Road Trip to Get a 350 SBC-Swapped Mini Truck! Finnegan's Garage Ep.115The 1-Week Chevy C10 Build and Road Trip-PART 2: Finnegan's Garage Ep.133Surprising My Wife On Our Wedding Anniversary With a New Car-Finnegan's Garage Ep.118The '61 Caddy Drag Car is Back! RollCage and Rearend Install: Finnegan's Garage Ep. 125The Crusher Impala! New Engine & Burnouts | Roadkill Garage | MotorTrendHow-To Build A Paint Booth in Your Driveway : Finnegan's Garage Ep.131How Much RPM? ALL OF IT - Running A Chevy Big Block Wide Open With a Massive Fuel Leak!Uncle Sam Is Hurt!! Assessing The Damage To The EngineDyno Results for the Body-Dropped and LT Swapped Chevy C10: Finnegan's Garage Ep.140The Corvair's FIRST Ever Rescue!LIVE Forgotten 1935 Ford Truck | Will It Run | Gene Winfield Inspired Build |RESTOREDFinnegan's Garage Ep.53: Triumph and Carnage at Drag Week 2018Chevy C10 $1,300 Budget Build Part 3 Short Bed Conversion Vice Grip Sawzall and Grinders!Twin Supercharged 4 Cylinder Nitro RC EngineMy C10 is Bent! Let's Fix it with A Better Way to Bend and Notch Tubing! Finnegan's Garage Ep.129The 200 mph Caddy is on the Ground! Finnegan's garage Ep.121New Chevy C10 Mod!! Finnegan's Garage Ep.128