Clay Slab Roller Update
My Premier Project Plans: https://paskmakes.com/premier-project-plans/
My Free Plans: https://paskmakes.com/free-plans/
I built this Clay Slab Roller a few months ago, since then it has had a workout and the roller has failed. The roller was made of plywood disks and with the amount of pressure put on the middle of the roller one of glue lines has given way. It was actually one of the original plywood glue lines that has failed. There is a video on my channel showing the roller build.
The fix was straight forward. After re-gluing the roller I turned it down a little with the original jig I used to make the roller, and then glued it into a piece of PVC pipe. I'm confident this will work now as the pipe and plywood together make for a very rigid roller. If I have to do any more updates I will video it to keep any interested viewers up to date.
I don't see any more issues though - but you never know!
I had some sound issues, too much sibilance that I struggled to eliminate in post production. I use a Canon 5D mk2 and just added a Rode shotgun mic so if anyone has any advice on settings I would appreciate it.
This wasn't the most exciting video but if anyone was to build a similar machine to this then they would need a heads up on the roller issue! I hope you enjoy the video anyway and as always I'm happy to answer any questions.
If you would like to support this channel you can do so here
https://www.patreon.com/PaskMakes
You can also help me out by purchasing one of my shirts, you can find them here https://paskmakes.threadless.com
Check out my new website
http://paskmakes.com/
Check out my Instagram to see more of my work https://www.instagram.com/paskmakes/
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) http://www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia
Видео Clay Slab Roller Update канала Pask Makes
My Free Plans: https://paskmakes.com/free-plans/
I built this Clay Slab Roller a few months ago, since then it has had a workout and the roller has failed. The roller was made of plywood disks and with the amount of pressure put on the middle of the roller one of glue lines has given way. It was actually one of the original plywood glue lines that has failed. There is a video on my channel showing the roller build.
The fix was straight forward. After re-gluing the roller I turned it down a little with the original jig I used to make the roller, and then glued it into a piece of PVC pipe. I'm confident this will work now as the pipe and plywood together make for a very rigid roller. If I have to do any more updates I will video it to keep any interested viewers up to date.
I don't see any more issues though - but you never know!
I had some sound issues, too much sibilance that I struggled to eliminate in post production. I use a Canon 5D mk2 and just added a Rode shotgun mic so if anyone has any advice on settings I would appreciate it.
This wasn't the most exciting video but if anyone was to build a similar machine to this then they would need a heads up on the roller issue! I hope you enjoy the video anyway and as always I'm happy to answer any questions.
If you would like to support this channel you can do so here
https://www.patreon.com/PaskMakes
You can also help me out by purchasing one of my shirts, you can find them here https://paskmakes.threadless.com
Check out my new website
http://paskmakes.com/
Check out my Instagram to see more of my work https://www.instagram.com/paskmakes/
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) http://www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia
Видео Clay Slab Roller Update канала Pask Makes
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making an Industrial Machinist's Chair - Vintage Style with Homemade PlywoodHow much Fun were these Sculpted Handles to Make? - Full Vanity BuildMissing Part for an Old Machine - Can I Produce a Realistic Copy?Simple Lumber RackMaking a Mitre Gauge Angle Setting GuideMaking a Unique Machine Stand - Easier ways but worth the Extra Effort?Mortiser Mitre JigHow are Windsor Rocking Chairs Made? Let’s find out!How to Make a Vintage Style Parts Organiser from Wood and MetalHow to Open and Make a Key for a Really Cool Vintage PadlockBuilding a Display Cabinet - for my Kayak - Is it Over the Top?Textured Picture Frame - Scrapwood Challenge Day ThreeHand Carved Measuring cups - Scrapwood Challenge Episode EightPlywood Swing Seat Upgrade - New & Improved4 Wooden Hinged Boxes Pt2 - Scrapwood Challenge ep42Making a Keepsake Box - How to match the Grain on all 4 CornersMaking 2 Tiny Planes - One with Basic tools and One MachinedHow to Easily Make Awesome and Authentic Cast Metal Lettering - it's CheatingShop Stools from Old Rusty Fence PostsLightweight Kayak Paddle from a Reclaimed Wooden BoardCircle/Square Chopping Board - (Day 7) 7 Scrapwood Challenges in 7 Days - ep49