Make a Simple Bed Upgrade for the K40 Laser Engraver
The K40 laser engraver is a great low cost solution if you want to start laser cutting as a hobby, but it does need some upgrades to get the most out of it- one of the things it needs is an adjustable bed.
I already changed out the mirrors, lens and added an air assist, but the last major upgrade needed was a more dependable adjust able bed for the laser to accommodate for different material thicknesses.
The small surgical scissor lift works well, but it does have a small surface area. With my upgrade, I can adjust the bed without putting my arm in the laser and can make dynamic adjustments while the laser is working, although I do not entirely recommend this.
Overall, the upgrade works well, but I still might have to make some small adjustments for the future.
Check out my other laser video here for the full commentary and review.
https://youtu.be/QKyFfMGM3Bs
I have links below for a lot of the items I've used to upgrade the laser. You will be helping out the channel if you purchase anything from those links.
---Upgrades and Parts---
K40 Laser Cutter
https://amzn.to/2Uxcrad
K40 Air Assist
https://amzn.to/39rtjDd
Cable Drag Chain
https://amzn.to/2UOjL00
Laser Safety Glasses
https://amzn.to/2WVJeqQ
k40 Replacement Mirrors
https://amzn.to/2QYN4M2
Scissor Stand (To adjust work piece height)
https://amzn.to/2UuSUqY
Focal Lens for K40
https://amzn.to/3bDxPQy
Honeycomb Table
https://amzn.to/3bFW3Ki
---Guides---
Geeksmithing Review:
https://www.youtube.com/watch?v=_OuGBUAiyzQ
Geeksmithing Laser Safety:
https://www.youtube.com/watch?v=vxQRsUVmU2s
Geeksmithing DIY Rotary:
https://www.youtube.com/watch?v=GOF0u9qsFOI&t=19s
One of the Best Mirror Alignment Tutorials
https://k40laser.se/lens-mirrors/k40-mirror-alignment-and-leveling-old-guide/
Please consider subscribing and supporting the channel on https://www.Patreon.com/GeekBuilders
For more info - Go to:
http://www.geekbuilders.net
**YouTube has disabled comments on the video, please follow and comment on socials. Sorry for the inconvenience
---Follow and Subscribe---
http://twitter.com/geekbuilders
http://instagram.com/geekbuilders
http://facebook.com/geekbuilder
http://twitch.tv/geekbuilders
***Check out the Making Geeks Podcast**
http://www.makinggeeks.com
---Music---
Music was Purchased from:
EpidemicSound.com
Видео Make a Simple Bed Upgrade for the K40 Laser Engraver канала GeekBuilders
I already changed out the mirrors, lens and added an air assist, but the last major upgrade needed was a more dependable adjust able bed for the laser to accommodate for different material thicknesses.
The small surgical scissor lift works well, but it does have a small surface area. With my upgrade, I can adjust the bed without putting my arm in the laser and can make dynamic adjustments while the laser is working, although I do not entirely recommend this.
Overall, the upgrade works well, but I still might have to make some small adjustments for the future.
Check out my other laser video here for the full commentary and review.
https://youtu.be/QKyFfMGM3Bs
I have links below for a lot of the items I've used to upgrade the laser. You will be helping out the channel if you purchase anything from those links.
---Upgrades and Parts---
K40 Laser Cutter
https://amzn.to/2Uxcrad
K40 Air Assist
https://amzn.to/39rtjDd
Cable Drag Chain
https://amzn.to/2UOjL00
Laser Safety Glasses
https://amzn.to/2WVJeqQ
k40 Replacement Mirrors
https://amzn.to/2QYN4M2
Scissor Stand (To adjust work piece height)
https://amzn.to/2UuSUqY
Focal Lens for K40
https://amzn.to/3bDxPQy
Honeycomb Table
https://amzn.to/3bFW3Ki
---Guides---
Geeksmithing Review:
https://www.youtube.com/watch?v=_OuGBUAiyzQ
Geeksmithing Laser Safety:
https://www.youtube.com/watch?v=vxQRsUVmU2s
Geeksmithing DIY Rotary:
https://www.youtube.com/watch?v=GOF0u9qsFOI&t=19s
One of the Best Mirror Alignment Tutorials
https://k40laser.se/lens-mirrors/k40-mirror-alignment-and-leveling-old-guide/
Please consider subscribing and supporting the channel on https://www.Patreon.com/GeekBuilders
For more info - Go to:
http://www.geekbuilders.net
**YouTube has disabled comments on the video, please follow and comment on socials. Sorry for the inconvenience
---Follow and Subscribe---
http://twitter.com/geekbuilders
http://instagram.com/geekbuilders
http://facebook.com/geekbuilder
http://twitch.tv/geekbuilders
***Check out the Making Geeks Podcast**
http://www.makinggeeks.com
---Music---
Music was Purchased from:
EpidemicSound.com
Видео Make a Simple Bed Upgrade for the K40 Laser Engraver канала GeekBuilders
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Laser Engraver Speed ResultsGluwphy 20w 8-in-1 LaserMake a Squirrel Feeder Picnic Table from Scrap // 30in30Forward Friday //Ep1 - Wes from GeeksmithingEnd of Year Wrap up Compilation Video :: GODIAL IN YOUR LASER - xTool XCS TESTINGOrganize your Sunglasses and Keys with this one day buildWe made a custom low cost board and batten bed for my overgrown son!How fast is your laser?Engrave Your Balls with the Ortur Rotary EngraverForward Friday //Ep2- Donovan from Once Upon a WorkbenchTransform Your Standard Folding Tables to Standing Height TablesSnap Ships Prototype :: Test DriveBay Area Maker Faire Impressions and Highlights :: GODIY Electronics with the Creation Crate Subscription Box Review :: Test DriveStop the Flame :: Review of Comgrow Air Assist for the Xtool D1Fantastic Laser Engraved Tumblers from Craft ExpressThis is the Custom NeoPixel Lightsaber You Want Full Featured Sabers from Saber FormsRepairing and Restoring a Sun Damaged Rocking ChairGeeking Out VLOG #3 My Year Anniversary and Maker Faire 2017 :: GOThis Video Wasn't Supposed to Happen :: Ortur Laser Master H10 Review