Plywood Sawhorse /Crosscut Table - Part 2

This is part 2 of the Plywood Sawhorse / Assembly Table / Workbench / Plywood Cross Cut Table Project.

Here I have made an attachment to go onto each end of the Plywood Sawhorses that I made in Part 1, they simply attach to each end of the sawhorses and two 50" long 2 x 4's fit into the notches to accommodate the 8' long 2x4's that make up the cutting table. I did not add more cross pieces because I intend to lay a piece of rigid styrofoam on top of this frame to use as a cutting surface.

Check out part 3, it shows how I made the workbench.
The assembly table top video is up on the channel now.

https://youtu.be/hrKBlfDw69o

I decided to make this so when I'm cutting down a full sheet of plywood I won't have to get down on the floor to cut it into more manageable sizes.

Please SUBSCRIBE if you like this video and feel free to leave any questions or comments about this project.

A BIG thumbs Up is always appreciated

Thanks for watching!

Check out Part 1 of this series.....

Part 1 Plywood Sawhorse/Assembly Table / Workbench Project
https://youtu.be/-tuooRkQfc4
Music FLUX - Hallow Voices

Видео Plywood Sawhorse /Crosscut Table - Part 2 канала HENRY !