Dark wood finish for my CEILING CLADDING | Van Build #17

After I put up the metal strips in the last epiode, now it's time to actually install the cladding. But because I want to spend as little time as possible working (especially painting!) over my head, I first install the cladding to predrill everything, then take it all down again to adjust, sand and paint it and then install it once again. Quite a lot of effort but worth it in my opinion. I also manage to sneak in the installation of my inverter!

What I used this episode:
*Tools*
Electric screwdriver
Jigsaw
Sander
Ruler
Pencil
Brush

*Materials*
Self-drilling screws
14mm fur tongue and groove
Swingcolor indoor solvent-free wood glaze palisander
ECTIVE CSI52 Sinus Charger-Inverter 500W/12V
-------------------------- Links -----------------------------

My Instagram: https://www.instagram.com/lenja_ka/

-------------------------- Music -----------------------------

Music by Silent Partner

Intro song by Silent Partner

-------------------------- About -----------------------------

I've been living in my 1979 Mercedes-Benz James Cook Campervan for two years now. I loved that van, but it was itching me to do my own conversion; alone and without any experience. I sold my old van and started my very own van conversion!
In this Van Build Series I will take you along my journey of building my own home on wheels. I will do everything from insulation, cladding and furniture to the water and electric system. And all that while I'm learning how to do these things on the way. I will go through many hours of work, frustrating moments and defeats in order to achieve the experience of creating things with my own hands. I hope you're enjoying this series and maybe you can even learn something from my ideas & mistakes. - Lenja

#vanconversion #ceiling #cladding

Видео Dark wood finish for my CEILING CLADDING | Van Build #17 канала Life of Lenja