021-Power Supply--Transformers (3)
In this video, transformer leads are trimmed and stripped. Primary leads of common polarity are twisted together for each transformer, then in two groups attached to hot line and neutral lines. Chassis ground and the lower half of the AC Power Connector shell are attached to the lower enclosure. All secondaries are tested; their actual voltages are recorded.
See http://ehobbyistblog.com/ for additional material.
Видео 021-Power Supply--Transformers (3) канала eHobbyistBlog
See http://ehobbyistblog.com/ for additional material.
Видео 021-Power Supply--Transformers (3) канала eHobbyistBlog
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
014-Breadboard-Transistor Sockets (2)
022-Prototyping System--Rectify & Filter (1)
023-Prototyping System--Rectify & Filter (2)
029-Power Supply--Regulators (3)
034-Power Supply--Variable + (8)
026-Prototyping System--Rectify & Filter (5)
x041-Prototyping System Power Supply—Plan B (4)
009-Breadboard--Power Strips (1)
033-Power Supply--Variable + (7)
031-Power Supply--Positive (5)
020-Power Supply--Transformers (2)
011-Breadboard--Power Strips (3)
012-Breadboard--Prototyping Matrix
037-Power Supply--Fooey
010-Breadboard--Power Strips (2)
004-Prototyping System Analysis Wrap-Up
032-Power Supply--Variable + (6)
x039-Prototyping System Power Supply--Plan B (2)
013-Breadboard-Transistor Sockets (1)
025-Prototyping System--Rectify & Filter (4)
001-Startup