How to make car with battery, connector, three tyres and motor.

Simple Battery Car (Using Motor, 3 Tyres, Connector)
You can make a very simple moving car for a school project using a battery, connector (wires), motor, and 3 tyres. Follow these steps.
🧰 Materials Needed
1 small DC motor
1 battery (AA or 9V works)
2 connector wires
3 tyres / wheels
1 cardboard or plastic base
Glue or tape
1 stick or straw (for axle)
⚙️ Step-by-Step Method
1️⃣ Make the Car Base
Cut a rectangular piece of cardboard.
This will be the body (chassis) of the car.
2️⃣ Attach the Back Wheels
Put a stick or straw across the back of the cardboard.
Fix two tyres on both ends of the stick.
These wheels should rotate freely.
3️⃣ Fix the Motor
Attach the motor near the back wheels with glue or tape.
Connect the motor shaft to one wheel (or attach a small rubber piece so it touches the wheel).
4️⃣ Attach the Front Wheel
Fix the third tyre at the front center of the cardboard.
This acts like a support wheel so the car balances.
5️⃣ Connect the Battery
Connect one wire from battery + to motor +.
Connect another wire from battery – to motor –. #dancehall #newmusic #dancehallmusic
When the wires touch the battery terminals, the motor will rotate and the wheel will move the car forward.
🔧 Simple Connection Diagram
Copy code

Battery (+) ---- wire ---- Motor (+)
Battery (-) ---- wire ---- Motor (-)
✅ Tip:
You can add a switch between the wire and battery to easily turn the car ON/OFF.
please like and subscribe my channel and thanks for your support.

Видео How to make car with battery, connector, three tyres and motor. канала Crazy_Creator