Kingdom Classic Curve Lectern - KL1000 Assembly Video

Thank you for your purchase of the Kingdom Classic Curve Lectern. This video has been created to help you to assemble this lectern with ease. Just follow the simple steps that you see on the screen.

All you will need is a flat head screw driver or a power drill with a large flat head driver bit. It would also be helpful to have a small razor knife or a pair of scissors to open the boxes and unwrap the packaging material. If you are using a power drill to speed the assembly process please be careful not to allow the drill to screw too tightly as this may crack the acrylic. A variable speed drill is recommended.

The Kingdom Classic Curve Lectern comes in two boxes. In the long box you will find the column. As you unpack the box remove the packaging material for the column. You will want to remove the protective film that surrounds the acrylic surface.

In the smaller box you will find a package of 8 screws as well as the top and base of the lectern. Remove the protective film from the base and top of the lectern.

Place the column on top of the base and line up the four holes. Place a screw in each of the four holes and tighten the screws with a flat head screwdriver or power drill with a flat head driver.
Now take the top of the lectern and place it on top of the column. Line up the holes and place a screw in each of the holes and tighten the screws.

You have now completed the assembly of the Kingdom Classic Curve Lectern and are ready to have many years of enjoyment.
Website; http://kingdom.com
Facebook-https://www.facebook.com/kingdomchurchtech/

Видео Kingdom Classic Curve Lectern - KL1000 Assembly Video канала Kingdom Tech Audio Video and Supplies