How to Wire and Configure a PID Temperature Controller - Cerakote Oven

I cover how to wire and program a PID controller for temperature control. Using a PID controller (Proportional, Integral, Derivative) for temperature control is probably the best way to control an oven temperature when accuracy is important.

I am using this PID (Proportional, Integral, Derivative) controller to manage the temperatures I need in a cerakote oven I made from an old smoker I picked up for $25. Some examples of where a PID controlled oven or other device could be used are distilling, brewing, incubators, reef tanks, a hen house, lizard habitat a steel or knife tempering oven. There are many possibilities where a PID temperature controller can come in handy.

This controller was a fun build and I have already used it for Cerakoting. Here's a video on How to Cerakote at Home: https://youtu.be/kWtjfuujQlk

Here's an affiliate link to the Twidec MV-100 I used for this project
https://amzn.to/3stC2iQ

0:00 Introduction
0:40 Overview of Twidec MV-100 PID Controller
2:05 Connection
3:02 Wiring the Controller
3:43 Wiring the Relay
5:21 Wiring in the Power Source
6:13 Wiring in the Thermocouple
6:32 Wiring Overview
7:30 Configuring the PID Controller
8:56 Testing the PID Temperature Controller
10:35 Checking PID Programming
11:38 Installing in Project Box
13:22 Whoops, Thermocouple on wrong side
13:54 Final Test
14:12 The End

#CerakoteOven
#TemperingOven
#PIDTemperatureControl

Видео How to Wire and Configure a PID Temperature Controller - Cerakote Oven канала Jose's Extreme DIY