🔴 Mini Talon, Overlook and maiden flights
Here's a quick look at my new plane, and some video from the maiden flight where I started getting it tuned up. It's a Mini Talon that I just finished. So far I'm liking it! Here's the info:
Mini Talon (obviously)
Eagle Tree Vector
Dragonlink V2 w/Micro RX
Emax ES08MA-II Servos
Sunnysky 2216 1250Kv Motor
APC 8x6E Prop
Hobbywing 30A Pentium ESC (Replaced with a Turnigy Trust 45A now, will eventually get a Castle Phoenix ICE 50)
Multistar 4S 5200mAh LiPo
400mW 1280/1258 vTX from RMRC, will probably replace with an 800mW soon
FPVPro Dipole antennas for UHF and video
Runcam HD2 for bot onboard HD as well as live video
Check the Mini Talon thread at RCGroups for more information on this plane than you could ever want to know... lol https://www.rcgroups.com/forums/showthread.php?t=2043439
Links to printed parts:
Airscoop (mine was printed without the flat base) http://www.thingiverse.com/thing:1732816
Offset tilt mount
http://www.thingiverse.com/thing:1658131
Flight Controller holder (must be built into the fuse before the halves are joined)
http://www.thingiverse.com/thing:1426633
Here's a remixed lighter version of the FC mount. I would have preferred this one, but my fuse was built before he released this one...
http://www.thingiverse.com/thing:1860720
I can't offer any advice as far as printing these parts, mine were kindly printed by a friend. I do not own a printer myself. :( One day! lol .
__
Patreon: https://www.patreon.com/bonafidepirate
You can help to support my channel by using the affiliate links below when making a purchase:
Banggood - http://bit.ly/piratebgood
eBay - http://ebay.to/2r7k3mb
Amazon - https://www.amazon.com/shop/bonafidepirate
Foxeer - http://www.foxeer.com/?u=499
You can also make a donation if you wish to do so at the following link:
Support my channel and my efforts to bring you better content, every little bit helps! http://paypal.me/keithluneau
Here's some affiliate links to the video gear I use from Ready Made R/C:
1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes) https://goo.gl/Mhq6TW
I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them: https://goo.gl/xC2RLx
I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above: https://goo.gl/hGmcNS
On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: https://goo.gl/CPuFGf
Видео 🔴 Mini Talon, Overlook and maiden flights канала bonafidepirate
Mini Talon (obviously)
Eagle Tree Vector
Dragonlink V2 w/Micro RX
Emax ES08MA-II Servos
Sunnysky 2216 1250Kv Motor
APC 8x6E Prop
Hobbywing 30A Pentium ESC (Replaced with a Turnigy Trust 45A now, will eventually get a Castle Phoenix ICE 50)
Multistar 4S 5200mAh LiPo
400mW 1280/1258 vTX from RMRC, will probably replace with an 800mW soon
FPVPro Dipole antennas for UHF and video
Runcam HD2 for bot onboard HD as well as live video
Check the Mini Talon thread at RCGroups for more information on this plane than you could ever want to know... lol https://www.rcgroups.com/forums/showthread.php?t=2043439
Links to printed parts:
Airscoop (mine was printed without the flat base) http://www.thingiverse.com/thing:1732816
Offset tilt mount
http://www.thingiverse.com/thing:1658131
Flight Controller holder (must be built into the fuse before the halves are joined)
http://www.thingiverse.com/thing:1426633
Here's a remixed lighter version of the FC mount. I would have preferred this one, but my fuse was built before he released this one...
http://www.thingiverse.com/thing:1860720
I can't offer any advice as far as printing these parts, mine were kindly printed by a friend. I do not own a printer myself. :( One day! lol .
__
Patreon: https://www.patreon.com/bonafidepirate
You can help to support my channel by using the affiliate links below when making a purchase:
Banggood - http://bit.ly/piratebgood
eBay - http://ebay.to/2r7k3mb
Amazon - https://www.amazon.com/shop/bonafidepirate
Foxeer - http://www.foxeer.com/?u=499
You can also make a donation if you wish to do so at the following link:
Support my channel and my efforts to bring you better content, every little bit helps! http://paypal.me/keithluneau
Here's some affiliate links to the video gear I use from Ready Made R/C:
1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes) https://goo.gl/Mhq6TW
I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them: https://goo.gl/xC2RLx
I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above: https://goo.gl/hGmcNS
On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: https://goo.gl/CPuFGf
Видео 🔴 Mini Talon, Overlook and maiden flights канала bonafidepirate
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
🔴 Mini Talon - 10 Miles (narrated), and my setup on the groundMeet the XUAV Mini Talon - Model Monday #2Mini Talon Build Number 3 & Maiden Flight (STorM32 roll gimbal)Mini Talon Down?! (Made it home safe)10 Unusual Aircraft to Keep Your Eyes OnZOHD Nano Talon - amazing quality, performance, and long range potential🍖 RAW: Mini Talon Line of Sight Maiden [ Goes #Amazeballs well! ]X-UAV Talon 1718mm 5 hour endurance FPV flight» Mini Talon VTOL BuildVolantex Ranger 2000 757-8 FPV plane - full review and maidenNew Reptile Dragon II Maiden comparing V-Tail &T-Tail! Here's what happened!» Mini Talon Overview - Gimbal, Parts, Setup & MoreNew ZOHD Nano Talon EVO - What's changed?AR Wing First FlightsMini Talon Fpv - 35km (21,8 mi) over sea and back | NEW RECORD | Long range flight4g LTE Drone Proof of ConceptLong Range FPV Skyhunter Setup WalkthroughMini Talon V2 (pro) UnboxingMini Talon - High altitude flightNarrated Skyhunter FPV Into the Night, almost broke it! lol