Meet the XUAV Mini Talon - Model Monday #2
Howdy, welcome to Model Monday! In this weeks episode you'll be meeting the XUAV MIni Talon that can be bought here http://bit.ly/2rz5EwJ. The Mini Talon is one of THE BEST models of all time. FULL setup details below, Press SHOW MORE for the details, Matt
IMPORTANT
================
So that we're ALL on the same page. I feel it's important to stress that the XUAV Mini Talon model was bought out of my OWN money, for my own abuses and was NOT a "Freebie for Review".
In this video meet V2 of my Mini Talon, V1 as just as good!
View/Purchase link: http://bit.ly/2GW0jdu
Parts List
================
I have done my best to list everything that I am using in my Mini Talon. See my notes below this section for extra info.
XUAV Mini Talon: http://bit.ly/2rz5EwJ
X2216 1250Kv Motor: http://bit.ly/2zebJWG
At least a 40A ESC. I'm using this one: http://bit.ly/2KPaLVp
8x6 Propeller: http://bit.ly/2Nt95iT
5200mAh 4S Multistar packs: http://bit.ly/2qjqY9I
TowerPro MG90S Servos (4): http://bit.ly/2FfUJNx
Twisted servo extension leads: http://bit.ly/2KDfWbT
Replacement Control Horns: http://bit.ly/2tYyMj5
Taranis Tx http://bit.ly/2NfOFZJ
Runcam 2 HD Camera http://bit.ly/2KU8OqS
180 degree pan servo http://bit.ly/2Jw5Nbg
Following on from the video one thing you cannot compromise on is the motor, the SunnySky motor here http://bit.ly/2zebJWG really is worth the money. I use the same motor in other models because it's soooo good!
The control horns that are provided are crubbish, bin them and use the ones suggested above (see here http://bit.ly/2tYyMj5 ).
I haven't listed a FPV camera & vTx above thats because I am using the Runcam owl Plus which they don't do anymore :( So instead, consider a RunCam Swift 2 or similar here http://bit.ly/2L1EPy0 , they're known to be great cameras.
If running 5.8GHz video, the TX526 here http://bit.ly/2HBOKVm is fantastic, I own several of these and they work great. Of course combine them with a quality antenna like this one http://bit.ly/2Fmey5z
For the fligth controller I am using the EagleTree Vector, however you can of course use iNav with a Mini Talon too. I used some foam board to make a tray for the Vector to sit upon. That worked out really well!
Mini Talon Top Lid Mod
================
The lid to the Mini Talon is feeble, see this simple mod using carbon fibre strips here http://bit.ly/2JveIu0 to make it strong enough to be used.
https://www.youtube.com/watch?v=MOWKj1VjGpI
Mini Talon 3D Printed Parts
================
While there are loads of 3D printable parts available for the Mini Talon which you can see on Marks site here http://www.itsqv.com/QVM/index.php?title=Parts_Catalog_-_Mini_Talon I elected to only use one item, which was the front skid/bumper.
Note that I have only used PLA filament for my parts and have had zero issues with warping etc....
The Pan & Tilt
https://www.thingiverse.com/thing:2779954
3D Scoop
https://www.thingiverse.com/thing:1874758
Bumper (the smaller one)
https://www.thingiverse.com/thing:2002631
RagTheNutsOff FaceBook Group
================
You can join over 2,700 cool pilots like me & you over in the FaceBook group here: https://www.facebook.com/groups/ragthenutsoff/
Support This Channel
================
If you've enjoyed this video or the YouTube channel as a whole, you CAN help SUPPORT this channel by using the links below before buying on any of these sites.
Banggood: http://bit.ly/rtno-bg
HobbyKing: http://bit.ly/rtno-hk
GearBest: http://bit.ly/rtno-gb
eBay: http://bit.ly/rtno-ebay
AliExpress: http://bit.ly/rtno-ae
These, as can be assumed ALL links in this description are "affiliate" links, which means I will gain a small percentage of the sale which can be put towards more models, reviews, RC parts, dancing ladies and/or coffee to keep this channel going.
If you would like to know how I started this channel by accident, see this video to find out more: https://www.youtube.com/watch?v=bmWc8vuFKx4
Matt
---
WANT MORE VIDEOS LIKE THIS ONE?
---
For more videos like this one, see my YouTube Channel here:
https://www.youtube.com/channel/UCWP6vjgBw1y15xHAyTDyUTw
Would you like to SEE THE NEW VIDEO'S BEFORE they're published on YouTube?
---
I post the videos in the FaceBalls group BEFORE they go live on YouTube.
You can join the group here:
https://www.facebook.com/groups/ragthenutsoff/
Видео Meet the XUAV Mini Talon - Model Monday #2 канала RagTheNutsOff
IMPORTANT
================
So that we're ALL on the same page. I feel it's important to stress that the XUAV Mini Talon model was bought out of my OWN money, for my own abuses and was NOT a "Freebie for Review".
In this video meet V2 of my Mini Talon, V1 as just as good!
View/Purchase link: http://bit.ly/2GW0jdu
Parts List
================
I have done my best to list everything that I am using in my Mini Talon. See my notes below this section for extra info.
XUAV Mini Talon: http://bit.ly/2rz5EwJ
X2216 1250Kv Motor: http://bit.ly/2zebJWG
At least a 40A ESC. I'm using this one: http://bit.ly/2KPaLVp
8x6 Propeller: http://bit.ly/2Nt95iT
5200mAh 4S Multistar packs: http://bit.ly/2qjqY9I
TowerPro MG90S Servos (4): http://bit.ly/2FfUJNx
Twisted servo extension leads: http://bit.ly/2KDfWbT
Replacement Control Horns: http://bit.ly/2tYyMj5
Taranis Tx http://bit.ly/2NfOFZJ
Runcam 2 HD Camera http://bit.ly/2KU8OqS
180 degree pan servo http://bit.ly/2Jw5Nbg
Following on from the video one thing you cannot compromise on is the motor, the SunnySky motor here http://bit.ly/2zebJWG really is worth the money. I use the same motor in other models because it's soooo good!
The control horns that are provided are crubbish, bin them and use the ones suggested above (see here http://bit.ly/2tYyMj5 ).
I haven't listed a FPV camera & vTx above thats because I am using the Runcam owl Plus which they don't do anymore :( So instead, consider a RunCam Swift 2 or similar here http://bit.ly/2L1EPy0 , they're known to be great cameras.
If running 5.8GHz video, the TX526 here http://bit.ly/2HBOKVm is fantastic, I own several of these and they work great. Of course combine them with a quality antenna like this one http://bit.ly/2Fmey5z
For the fligth controller I am using the EagleTree Vector, however you can of course use iNav with a Mini Talon too. I used some foam board to make a tray for the Vector to sit upon. That worked out really well!
Mini Talon Top Lid Mod
================
The lid to the Mini Talon is feeble, see this simple mod using carbon fibre strips here http://bit.ly/2JveIu0 to make it strong enough to be used.
https://www.youtube.com/watch?v=MOWKj1VjGpI
Mini Talon 3D Printed Parts
================
While there are loads of 3D printable parts available for the Mini Talon which you can see on Marks site here http://www.itsqv.com/QVM/index.php?title=Parts_Catalog_-_Mini_Talon I elected to only use one item, which was the front skid/bumper.
Note that I have only used PLA filament for my parts and have had zero issues with warping etc....
The Pan & Tilt
https://www.thingiverse.com/thing:2779954
3D Scoop
https://www.thingiverse.com/thing:1874758
Bumper (the smaller one)
https://www.thingiverse.com/thing:2002631
RagTheNutsOff FaceBook Group
================
You can join over 2,700 cool pilots like me & you over in the FaceBook group here: https://www.facebook.com/groups/ragthenutsoff/
Support This Channel
================
If you've enjoyed this video or the YouTube channel as a whole, you CAN help SUPPORT this channel by using the links below before buying on any of these sites.
Banggood: http://bit.ly/rtno-bg
HobbyKing: http://bit.ly/rtno-hk
GearBest: http://bit.ly/rtno-gb
eBay: http://bit.ly/rtno-ebay
AliExpress: http://bit.ly/rtno-ae
These, as can be assumed ALL links in this description are "affiliate" links, which means I will gain a small percentage of the sale which can be put towards more models, reviews, RC parts, dancing ladies and/or coffee to keep this channel going.
If you would like to know how I started this channel by accident, see this video to find out more: https://www.youtube.com/watch?v=bmWc8vuFKx4
Matt
---
WANT MORE VIDEOS LIKE THIS ONE?
---
For more videos like this one, see my YouTube Channel here:
https://www.youtube.com/channel/UCWP6vjgBw1y15xHAyTDyUTw
Would you like to SEE THE NEW VIDEO'S BEFORE they're published on YouTube?
---
I post the videos in the FaceBalls group BEFORE they go live on YouTube.
You can join the group here:
https://www.facebook.com/groups/ragthenutsoff/
Видео Meet the XUAV Mini Talon - Model Monday #2 канала RagTheNutsOff
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Mini Talon Build Number 3 & Maiden Flight (STorM32 roll gimbal)Meet The Ritewing Mini Drak - Model Monday #1📦 Unboxing a ZOHD Nano Talon #2 (YES! This is my 2nd Nano Talon)Mini Talon Build Overview & Maiden» Mini Talon Overview - Gimbal, Parts, Setup & MoreHow to Skin a Foam Wing with Laminating FilmZOHD Nano Talon Evo elevator fix (RC Plane)Crazy mid-air RC plane crash21+km FrSky R9MM range testing with the ZOHD Talon GTChoosing a motor and prop for your fixed wing model: Some hints and tips06 Mini Talon - Beautifull GamesMini talon Hand Throw Launch with APM Arduplane delayed Auto TakeOffRitewing Drak Lamination Tips and TricksZOHD NANO TALON FPV Review with RunCam SPLIT MINI & RadioLink AT10ii [Flight, Range, CRASH! Test]Meet the XUAV Clouds - Model Monday #3HOW-TO Full Autopilot and FPV system on almost any model planeThe NEW "MARS Warrior" Unboxing | FPV V-Tail WingZOHD Talon GT Rebel maidenDIY Cessna RC airplane