H125 Micro Quad Assembley Tutorial -7mm motor micro SciSky (under $50)
Looking for an affordable trainer quad that you’ll still enjoy flying after you've mastered your moves? This H125 micro quad might be the right choice. Measuring just under 100mm long, about 75mm wide, and 125mm diagonally, this is the perfect medium-sized micro quad for just about every skill level and every age, weighing in at just 45 grams fully-stuffed, including the battery! We've based this micro around the 7mm brushed motor because we've found that they’re inexpensive yet get the job done. Instead of using screws and aluminum spacers, the quad is designed around a peg system that saves a significant amount of weight and makes construction and repairs a snap. Using a Turnigy nanotech 260mah lipo, you will get about 4 1/2 minutes of flight time. If you happen to own a 3D printer, make sure to download our .STL files for FREE from the Thingiverse link included below. Our Thingiverse page also includes a full slide deck that’s laid out for teaching an intro class to drones. Our slide deck tutorial includes detailed photos of the quad through all steps of assembly, clear instructions on how to perform each step, and a complete CleanFlight walkthrough. If you don't have a 3D printer, we are now offering 3D printed frames which are available from the link below. We've also compiled a complete parts list which is also available on Thingiverse. If you have any suggestions on how we can modify our design to make it better just leave a comment.
Thingiverse link: http://www.thingiverse.com/thing:1705383
H125 flight video: https://www.youtube.com/watch?v=tDiuvKmSKK0&t=9s
Видео H125 Micro Quad Assembley Tutorial -7mm motor micro SciSky (under $50) канала BananaScience
Thingiverse link: http://www.thingiverse.com/thing:1705383
H125 flight video: https://www.youtube.com/watch?v=tDiuvKmSKK0&t=9s
Видео H125 Micro Quad Assembley Tutorial -7mm motor micro SciSky (under $50) канала BananaScience
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Micro Quad Electronics3D Printed Racing Drone - PEON 230 (under $150)How to Balance Charge 3 1s LiPo's At Once -IMAX B6Ninebot ES/SNSC ESC/Control Board Flashing TutorialHow to Make a Homemade Drone3 ways to fix loose props - how to secure propellers on micro brushed motors - EASY FIXBuild a Mini Quadcopter With 3D Printer3DPrinting with High Strength Filaments for DronesCHEAP FPV UNDER $100Micro SciSky Soldering Tutorial3D PRINTED RC CAR - Easy assembly guide3D Printed 4” Racing Quadcopter: From Design to Maiden Flight3D Printed Mini Racing Quadcopter HOWTO: Hovership MHQ2 Part 1How to Balance 2" and 3" Micro Quad Props Like a Pro3D Printed RC Airplane - CRASH!!!3D PRINTED RACING DRONE - Can it rip balls? 🙌🏻3D Printed Brushed FPV Quadcopter: Print, Build & Fly3D Printing Pen - Quadcopter Propeller3D Print Super Whoop micro drone at homeHow to Build a Cool & Cheap 3D Printed Mini Drone