Micro Quad Electronics

If you have been following along as I designed and 3D printed a micro quad frame then this is your next step! I show how to install all the electronics into the MK XI Micro Quad frame and get you flying!

I explain how to connect the Tiny FrSky receiver to the F3 Evo Micro Brushed flight controller using SBUS. Then I show you how to install the motors into the frame and solder them into the FC. After the FC and RX and motors are all connected and mounted the FPV camera is what get soldered in next. After all the components are soldered in I show you how to set up the Taranis and bind it to the Micro Quad.
After that I open up BetaFlight and walk you through the process getting all the settings just right for this fantastic little drone.
I hope this helps you get in the air faster and with fewer headaches. Multirotors are so much fun, but sometimes getting into the hobby can be difficult!

Let me know in the comments what was most helpful to you or if you can help teach me something new that would be better or more efficient. I am learning as I go and definitely do not know everything.

LINKS~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

IF YOU WON A FRAME CONTACT ME HERE: https://www.facebook.com/neatherbot/

MK XI Frame & Motor Mounts: http://bit.ly/2jT8NST

SpinTech Motors: http://amzn.to/2fZT3wx
*OR*
Hubsan X4 Motors: http://amzn.to/2fZPFSg

F3 Evo Micro Flight Controller (BIG): http://bit.ly/2kG41wp

Frsky 8CH Receiver: http://bit.ly/2fJvSu7

Batteries & Charger: http://amzn.to/2kFXx0s

FPV Camera: http://amzn.to/2kFY0Qu

Propellers: http://amzn.to/2kG7omO

Taranis Transmitter: http://amzn.to/2kG4L4J

Eachine FPV Goggles: http://bit.ly/2etlSz1

TX01 FPV Camera: http://bit.ly/2gTOgQL

TX02 FPV Camera: http://bit.ly/2gvoEWG

Fatshark FPV Goggles: http://amzn.to/2kGbxHF
MUSIC~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Alan Walker - Force
ANDROZIIX - Punisher

Видео Micro Quad Electronics канала NeatherBot