How to check AHC baseline pressures for 100 series trucks, LX470 and Land Cruiser, with a surprise!

How to baseline your AHC system using Techstream, which can be acquired by various means online, search the IH8Mud forums for more info on that.

Quick pressure reference specs: Front 6.9 +/- 0.5 mpa, Rear 5.6 - 6.7 mpa

Higher pressures are usually associated with weak torsion bars or rear springs since the system must pick up the extra load of the vehicle.

Next I'll be turning up my torsion bars and replacing all my shock bushings and mounts followed by a fluid flush. I'm trying to keep this system going for as long and cheaply as possible. I think this is an incredible suspension for a stock/mildly built truck, at the flick of a switch you can ride on a magic carpet or go to "sport" and stiffen the handling for mountain roads, not to mention 2" lift on demand.

Видео How to check AHC baseline pressures for 100 series trucks, LX470 and Land Cruiser, with a surprise! канала Eric Lemos