How to Install a Quick Disconnect Fire Extinguisher Mount
How to install a quick disconnect fire extinguisher bracket. This can be applied to any vehicle, for this I’m using my boat.
Amazon affiliated links:
US:
Fire extinguisher bracket: https://amzn.to/3Pn1qor
Canada:
Fire extinguisher bracket: https://amzn.to/446CJ3U
First is mounting the fire extinguisher to the bracket, use the supplied gear clamps to hold it into place. Position the screw portion of the clamp in a way it doesn’t interfere with anything.
Now installing it on my boat, I’m mounting it in the cuddy cabin to the carpeted wood panels. Two 1” countersunk screws are needed. This can also be mounted on a roll bar, they have a foam pad installed for this which I removed.
When done, simply pull the knob and the extinguisher falls out with ease.
Website: http://4diyers.com
Patreon: https://www.patreon.com/4diyers
Facebook: https://www.facebook.com/4diyers
Twitter: https://twitter.com/4DIYers
Instagram: https://www.instagram.com/4diyers/
Tumblr: http://4diyers.tumblr.com
Pintrest: https://www.pinterest.com/4diyers/
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.
Видео How to Install a Quick Disconnect Fire Extinguisher Mount канала 4DIYers
Amazon affiliated links:
US:
Fire extinguisher bracket: https://amzn.to/3Pn1qor
Canada:
Fire extinguisher bracket: https://amzn.to/446CJ3U
First is mounting the fire extinguisher to the bracket, use the supplied gear clamps to hold it into place. Position the screw portion of the clamp in a way it doesn’t interfere with anything.
Now installing it on my boat, I’m mounting it in the cuddy cabin to the carpeted wood panels. Two 1” countersunk screws are needed. This can also be mounted on a roll bar, they have a foam pad installed for this which I removed.
When done, simply pull the knob and the extinguisher falls out with ease.
Website: http://4diyers.com
Patreon: https://www.patreon.com/4diyers
Facebook: https://www.facebook.com/4diyers
Twitter: https://twitter.com/4DIYers
Instagram: https://www.instagram.com/4diyers/
Tumblr: http://4diyers.tumblr.com
Pintrest: https://www.pinterest.com/4diyers/
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.
Видео How to Install a Quick Disconnect Fire Extinguisher Mount канала 4DIYers
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Review: Auxito AJ01 Jump Starter with Air CompressorHow to Install Winter Wheels and Tires on your CarHow to Protect your Car from RustHow to Permanently Restore Faded or Hazy HeadlightsHow to Install a Swing Storage Box from Vevor in a Dodge RamHow to Cut Aluminum using a Mitre SawHow to Reset the Engine Oil Life Warning on a Honda FitHow to Use an LED Test LightHow to Test the Brake Fluid in your CarA Must Know Safety Tip for a Drill PressHow to Polish a Scratched Plastic ScreenHow to Clean a Gasket Sealing SurfaceHow to Lap Reed CagesHow to Check if Reed Valves are BadHow to Install Trailer Wiring in a Mazda CX9How to Replace the Fuel Filter on a BMW 335d with Bleeding ProcedureHow to Install Moritmoto LED Fender Light in a BMW 3 SeriesHow to Install a Trailer Hitch on a Mazda CX9Review: TOPDON ArtiDiag600 S OBD2 ScannerHow to Install a Swirl Flap Delete Kit on a BMW M57 335d