Small Gasoline blowtorch - Restoration

In today's episode we will look at the renovation of an old German aircraft lamp. BAT 100-1.
If you have any information, you can share it with others on my Facebook page:

https://www.facebook.com/groups/951735661652138/

If you have any questions about the process, use machines or other things, ask me in the comments. I try to answer everyone and as soon as possible.

I'm sorry for my bad English, it's not my language.

I'm uploading videos about recovering mechanical things. I'm uploading videos about restoring old wooden things. I fix things as I can. I am self-taught. Therefore, if some practices are bad, then forgive me. Thank you.

Share and send if you like this recovery :)

Thanks for your advice on how to improve this channel!

youtube channel https://www.youtube.com/user/veradona1

action index:
00:01 Introducing the lamp
00:35 Dismantling parts
05:45 Removing asbestos seals.
06:25 On the brass part I used a "brass cleaner" consisting of several kinds of acids.
07:40 Clean brass parts with distilled water.
08:15 Drying was followed by polishing with a rag wheel and polishing paste.
09:50 Polishing paste residues can be easily removed with cleaning petrol or acetone.
12:00 I used a common kitchen cleaner to clean the bakelite parts.
12:50 Glue the cracked part of bakelite with two-component glue.
after drying, sand it with fine sandpaper of P2000 roughness and then varnish with clear varnish.
16:00 We have all parts ready and can be assembled.
22:55 Copper soldering tip remains. Good to have spare parts :))
25:15 Comparison before and after renovation.
25:54 Test. In fact, it seems to me as a whole dangerous toy.
Thank you for 27:02 minutes of your time.

If you would like to contribute to the development of our channel with any amount:

My Patreon Page: https://www.patreon.com/VeradonaRestoration
My Paypal: veradona@email.cz

Everything thank you :)

Видео Small Gasoline blowtorch - Restoration канала Veradona Restoration