Molding A VERY Complex Object. Is It Even Possible? Part 1.
I love all thing dinosaur!
So the opportunity to mold and cast a Daspletosaurus skull model made from a scan of an actual fossil was thrilling to me. Daspletosaurus is in the Tyrannosauridae family and is a close relative of Tyrannosaurus Rex. The skull is a very complex object and very challenging to mold and cast. It was necessary to break the skull into sections to simplify the pieces. I molded each section in silicone rubber and made the castings from urethane resin.
Thanks to Jesse for sending in this project.
Check out the Idaho Virtualization Laboratory at:
https://www.isu.edu/imnh/idaho-virtualization-lab/
Here is a list of suppliers for the rubber, resins and waxes I use in my videos:
https://www.dropbox.com/s/kz6mhmf7v5vpy7l/Material%20and%20Suppliers.pdf?dl=0
Do you have a project to suggest for the channel?
Here’s a .pdf with everything you need to know:
https://www.dropbox.com/s/pjb0l6fr7zjttec/YouTube%20Collaboration.pdf?dl=0
TIME STAMPS
00:00 Daspletosaurus skull scan from The Idaho Virtualization Laboratory
01:01 Prepping the model for molding.
02:54 Orienting models in space so that the mold fills correctly.
04:14 Designing the system of sprues and vents.
06:37 Attaching vents to a model using wax rods.
12:48 Designing the mold cases.
16:31 Building the mold cases.
19:27 Waxing the mold cases and installing the models.
21:28 Installing the clear plastic mold fronts.
23:27 Pouring the rubber into the mold cases.
26:55 Hit that like button and thanks for watching!
Видео Molding A VERY Complex Object. Is It Even Possible? Part 1. канала Robert Tolone
So the opportunity to mold and cast a Daspletosaurus skull model made from a scan of an actual fossil was thrilling to me. Daspletosaurus is in the Tyrannosauridae family and is a close relative of Tyrannosaurus Rex. The skull is a very complex object and very challenging to mold and cast. It was necessary to break the skull into sections to simplify the pieces. I molded each section in silicone rubber and made the castings from urethane resin.
Thanks to Jesse for sending in this project.
Check out the Idaho Virtualization Laboratory at:
https://www.isu.edu/imnh/idaho-virtualization-lab/
Here is a list of suppliers for the rubber, resins and waxes I use in my videos:
https://www.dropbox.com/s/kz6mhmf7v5vpy7l/Material%20and%20Suppliers.pdf?dl=0
Do you have a project to suggest for the channel?
Here’s a .pdf with everything you need to know:
https://www.dropbox.com/s/pjb0l6fr7zjttec/YouTube%20Collaboration.pdf?dl=0
TIME STAMPS
00:00 Daspletosaurus skull scan from The Idaho Virtualization Laboratory
01:01 Prepping the model for molding.
02:54 Orienting models in space so that the mold fills correctly.
04:14 Designing the system of sprues and vents.
06:37 Attaching vents to a model using wax rods.
12:48 Designing the mold cases.
16:31 Building the mold cases.
19:27 Waxing the mold cases and installing the models.
21:28 Installing the clear plastic mold fronts.
23:27 Pouring the rubber into the mold cases.
26:55 Hit that like button and thanks for watching!
Видео Molding A VERY Complex Object. Is It Even Possible? Part 1. канала Robert Tolone
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Casting A VERY Complex Object - Is It Even Possible? Part 2.](https://i.ytimg.com/vi/UMjQruJxNDo/default.jpg)
![Pressure Casting Resin On Wood](https://i.ytimg.com/vi/xssToge2pWo/default.jpg)
![You Want Me To Cast What!](https://i.ytimg.com/vi/mEyFIZugGZA/default.jpg)
![](https://i.ytimg.com/vi/XxrWre_5YFY/default.jpg)
![Pouring A Rubber Blanket 1-Piece Cut Mold.](https://i.ytimg.com/vi/Nvl7JD69MzY/default.jpg)
![Making A Mold For Roto Casting - Part 1](https://i.ytimg.com/vi/SmQCpj0sXso/default.jpg)
![One Mold - Cast Three Ways](https://i.ytimg.com/vi/TnXXVbpI-gw/default.jpg)
![Make Perfect Resin Castings](https://i.ytimg.com/vi/WSFH6KCHulo/default.jpg)
![Making Very Large Silicone Molds](https://i.ytimg.com/vi/f8P5Ccyz9Zw/default.jpg)
![Silicone Mold Making - Three Different Ways](https://i.ytimg.com/vi/1qOwem_ll68/default.jpg)
![Save Money By Recycling Used Rubber](https://i.ytimg.com/vi/gM0fEZEprxY/default.jpg)
![Crazy Cuts Can Create Clean Castings](https://i.ytimg.com/vi/A8_M_ChD54Q/default.jpg)
![Cast Parts Fast Using Tree Molds And Gang Molds](https://i.ytimg.com/vi/opSxFTcLEWo/default.jpg)
![Making A Product From Scratch - Silicone Mold, CNC Machining & Resin Casting](https://i.ytimg.com/vi/RooDSCfF5_U/default.jpg)
![Hollow Casting With Solid Parts? How Would I Cast That - #1](https://i.ytimg.com/vi/gIfASVU9Ft8/default.jpg)
![Tips And Tricks For Making Miniatures](https://i.ytimg.com/vi/MuxynPYpy0c/default.jpg)
![Crazy Cuts Create Clean Castings!](https://i.ytimg.com/vi/jTSvp-o250o/default.jpg)
![Silicone Rubber Molds - 3 Ways Part 1](https://i.ytimg.com/vi/KChf_yCuNuE/default.jpg)
![Setting Up A Small Shop!](https://i.ytimg.com/vi/FKu4yho5W9A/default.jpg)
![DIY Silicone Molds - Excerpt](https://i.ytimg.com/vi/6ikF1h2QbM4/default.jpg)