How to make RC Cylinder only with minilathe [no cnc there] step by step [plans included]
Hy There,
Speed 1.25 work just fine i think if you want to save minute or two
I already make a few video about RC hydraulic and see, that there is preatty good interest for that kind of video, so i decided to make a new video about how to make rc cylinder without cnc machine, maybe the video is too long, but i want to explain as much as i can so everyone with a chep small lathe can make his own rc cylinder.
But at the same time if you got a bigger lathe, just multiply the measures and you can make a real cylinder for your tractor, excavator or any other tool, Main concept is tottaly the same.
And here is the video about how to make valve:
https://www.youtube.com/watch?v=DPEbNPFBz9A&t
If you got some questine fell free and ask it into comment.
If there will be enough interest (comment) i will make that kind of video also for "how to make rc hydraulic valve only with minilathe"
i also planing to make a hydraulic pump but still looking for more free time :)
material i used:
-12/13mm brass tube
-18mm brass round rod
-13mm aluminium round bar
-4mm steel rod
-6mm brass round bar (optional)
-4mm hex round bar (optional)
-4x1 o ring
-10x1 o ring
-11x1 o ring
-M3 self lock nut
-M4 nut
-threadlock
Plans you can find there:
(there is plans in jpg photo and original plans you need google layout 2015 to open it)
https://drive.google.com/open?id=12f5FxSjrCwPes6v8aiMdLLj71kn7Huop
My other hydraulic videos:
https://www.youtube.com/watch?v=0FM2hFYzTPs&t
https://www.youtube.com/watch?v=WaeEBXaj-vA&t=
https://www.youtube.com/watch?v=-ysOO3XsOXE
https://www.youtube.com/watch?v=-2gwtHt5AxA
https://www.youtube.com/watch?v=jLYJOSKB4QU
https://www.youtube.com/watch?v=PJ_ZeVw9FdQ
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500, Sony A6000 & gopro4
Music is from YouTube audiolibrarry:
The Life and Death of a Certain K. Zabriskie, Patriarch - Chris Zabriskie
Skladba The Life and Death of a Certain K. Zabriskie, Patriarch izvajalca Chris Zabriskie je licencirana z licenco Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Vir: http://chriszabriskie.com/vendaface/
Izvajalec: http://chriszabriskie.com/
Видео How to make RC Cylinder only with minilathe [no cnc there] step by step [plans included] канала TinC33
Speed 1.25 work just fine i think if you want to save minute or two
I already make a few video about RC hydraulic and see, that there is preatty good interest for that kind of video, so i decided to make a new video about how to make rc cylinder without cnc machine, maybe the video is too long, but i want to explain as much as i can so everyone with a chep small lathe can make his own rc cylinder.
But at the same time if you got a bigger lathe, just multiply the measures and you can make a real cylinder for your tractor, excavator or any other tool, Main concept is tottaly the same.
And here is the video about how to make valve:
https://www.youtube.com/watch?v=DPEbNPFBz9A&t
If you got some questine fell free and ask it into comment.
If there will be enough interest (comment) i will make that kind of video also for "how to make rc hydraulic valve only with minilathe"
i also planing to make a hydraulic pump but still looking for more free time :)
material i used:
-12/13mm brass tube
-18mm brass round rod
-13mm aluminium round bar
-4mm steel rod
-6mm brass round bar (optional)
-4mm hex round bar (optional)
-4x1 o ring
-10x1 o ring
-11x1 o ring
-M3 self lock nut
-M4 nut
-threadlock
Plans you can find there:
(there is plans in jpg photo and original plans you need google layout 2015 to open it)
https://drive.google.com/open?id=12f5FxSjrCwPes6v8aiMdLLj71kn7Huop
My other hydraulic videos:
https://www.youtube.com/watch?v=0FM2hFYzTPs&t
https://www.youtube.com/watch?v=WaeEBXaj-vA&t=
https://www.youtube.com/watch?v=-ysOO3XsOXE
https://www.youtube.com/watch?v=-2gwtHt5AxA
https://www.youtube.com/watch?v=jLYJOSKB4QU
https://www.youtube.com/watch?v=PJ_ZeVw9FdQ
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500, Sony A6000 & gopro4
Music is from YouTube audiolibrarry:
The Life and Death of a Certain K. Zabriskie, Patriarch - Chris Zabriskie
Skladba The Life and Death of a Certain K. Zabriskie, Patriarch izvajalca Chris Zabriskie je licencirana z licenco Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Vir: http://chriszabriskie.com/vendaface/
Izvajalec: http://chriszabriskie.com/
Видео How to make RC Cylinder only with minilathe [no cnc there] step by step [plans included] канала TinC33
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
(PART 19) How to install Hydraulic 3-Way Valve on RC ExcavatorHydraulic CAR JACK modificationHow to make RC hydraulic valve only with minilathe [no cnc there] step by step [plans included]Soba 5" / 125 mm Rotary Table , Chuck , Dividing Set Kit [unboxing, review, setup and first test]Build - RC Hitachi Zaxis ZX135US 1:15 Scale Excavator Part 1 - ArmPVC pneumatic cylinderhow to rebuild a hydraulic cylinderMaking hydraulic cylinder30 Minutes Of Amazing Machinery & Most Admirable Worker Ever Before #5Turning a 1 Piece Miniature Crankshaft....This one is pretty coolMaking The Hydraulic Press - DIY 20 Ton Hydraulic Shop Press from scrap metalMaking double acting cylinder with double piston rodLook what this powerful machine do - Creative machines with incredible power.RC HOW TO MAKE a HYDRAULIC from PVC pipe can be done at home by yourself (Part 21)How does a cylinder work? Hydraulic and pneumatic - Pascal's lawBuild - RC Hitachi Zaxis ZX135US 1:15 Scale Excavator Part 3 - Cab and upper carriageControlling a Pneumatic Cylinder EasilyHomemade Mini Lathe Machine - Mini Lathe BuildHow to make an RC Truck Chassis from Aluminum.