How to make RC hydraulic valve only with minilathe [no cnc there] step by step [plans included]
Hy There,
Into video about "how to make rc cylinder" i got lot of question when the video about valve will come, and finally it's here.
Valve is much easier to make like cylinder, and really all we need is a minilathe and some tools.
i make this valve preatty big, so i can easily show you, but that valve is easy to make in 20mm diameter or eaven smaller.
To mount servomotor on that valve use some imagination, it shouldn't be hard, or wait until i make some hydraulic project and make it :)
material i used:
-30mm aluminium round rod
-20mm bras round rod
-4mm hex brass bar
-5x7mm or 5x9mm o-ring
-seal paste (i use loctite 518)
Plans you can find there:
I share plans for 25mm and 30mm diameter valve, all the plans is on .jpg files with low quality and high quality (600DPI) so you can see every tiny detail.
https://drive.google.com/drive/folders/10ZGIleZdnui74P5770FFy1uyd_gDSxX7
Making of: Proxxon/dremel drill holder for minilathe
https://www.youtube.com/watch?v=1AJPM3GXaco&t
My other hydraulic videos:
How to make RC Cylinder only with a minilathe:
https://www.youtube.com/watch?v=QRg0ZAvxVFk&t
Using hydraulic on rc Car for lift the snow plow
https://www.youtube.com/watch?v=gm4Hr7pFyUk&t
Other:
https://www.youtube.com/watch?v=0FM2hFYzTPs&t
https://www.youtube.com/watch?v=WaeEBXaj-vA&t=
https://www.youtube.com/watch?v=-ysOO3XsOXE
https://www.youtube.com/watch?v=-2gwtHt5AxA
https://www.youtube.com/watch?v=jLYJOSKB4QU
https://www.youtube.com/watch?v=PJ_ZeVw9FdQ
This is my affiliate link to a lathe tool from banggood if you maybe need some.
If you bought from there you will support me and a project like that.
https://www.banggood.com/custlink/DvGKIb917B
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube audiolibrary
1. Chunk - Quincas Moreira
2. Center Ring - Freedom Trail Studio
3. Happy Sixth - Freedom Trail Studio
4. Morning Mist - Quincas Moreira
5. Stardrive - Jeremy Blake
Видео How to make RC hydraulic valve only with minilathe [no cnc there] step by step [plans included] канала TinC33
Into video about "how to make rc cylinder" i got lot of question when the video about valve will come, and finally it's here.
Valve is much easier to make like cylinder, and really all we need is a minilathe and some tools.
i make this valve preatty big, so i can easily show you, but that valve is easy to make in 20mm diameter or eaven smaller.
To mount servomotor on that valve use some imagination, it shouldn't be hard, or wait until i make some hydraulic project and make it :)
material i used:
-30mm aluminium round rod
-20mm bras round rod
-4mm hex brass bar
-5x7mm or 5x9mm o-ring
-seal paste (i use loctite 518)
Plans you can find there:
I share plans for 25mm and 30mm diameter valve, all the plans is on .jpg files with low quality and high quality (600DPI) so you can see every tiny detail.
https://drive.google.com/drive/folders/10ZGIleZdnui74P5770FFy1uyd_gDSxX7
Making of: Proxxon/dremel drill holder for minilathe
https://www.youtube.com/watch?v=1AJPM3GXaco&t
My other hydraulic videos:
How to make RC Cylinder only with a minilathe:
https://www.youtube.com/watch?v=QRg0ZAvxVFk&t
Using hydraulic on rc Car for lift the snow plow
https://www.youtube.com/watch?v=gm4Hr7pFyUk&t
Other:
https://www.youtube.com/watch?v=0FM2hFYzTPs&t
https://www.youtube.com/watch?v=WaeEBXaj-vA&t=
https://www.youtube.com/watch?v=-ysOO3XsOXE
https://www.youtube.com/watch?v=-2gwtHt5AxA
https://www.youtube.com/watch?v=jLYJOSKB4QU
https://www.youtube.com/watch?v=PJ_ZeVw9FdQ
This is my affiliate link to a lathe tool from banggood if you maybe need some.
If you bought from there you will support me and a project like that.
https://www.banggood.com/custlink/DvGKIb917B
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube audiolibrary
1. Chunk - Quincas Moreira
2. Center Ring - Freedom Trail Studio
3. Happy Sixth - Freedom Trail Studio
4. Morning Mist - Quincas Moreira
5. Stardrive - Jeremy Blake
Видео How to make RC hydraulic valve only with minilathe [no cnc there] step by step [plans included] канала TinC33
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to make RC Cylinder only with minilathe [no cnc there] step by step [plans included]Making of: Small precize lathe tool out of broken drill bits [M4 internal thread cutting]RC micro HYDRAULIK-ventil Prototyp FunktionsTESTRC HOW TO MAKE a HYDRAULIC from PVC pipe can be done at home by yourself (Part 21)30 Minutes Of Amazing Machinery & Most Admirable Worker Ever Before #5construir una excavadora RC hidráulica desde cero CAT330 a 110 en metalHydraulic System for 1/12 rc model operation videoDirectional Control Valve Basics - Part 1Making hydraulic pullerBUILDING a "KOBELCO EURO" EXCAVATOR (Track Hoe) - LESU ALL Metal PC360 Kit PT 5 | RC ADVENTURES(Part 16)HOW TO MAKE Engine oil pump Em185 to be Hydraulic control Excavator RCRC Construction Excavator and Tractor Truck Hydraulic Sharing Gear Pump Handmade Design at home #4DIY own RC hydraulic valves on BF25LMaking hydraulic cylinderTop 4 Best Mini Metal Lathe MachinesNEJE vs NEJE S models 8bit vs 32bitSystem Hydraulic Excavator RC ( 6 Version )Old GearBox Reducer for Cordless Drill ??? Building a simple Lathe for Woodworking"PROJECT: JOHNSON" aka "THE BiG ONE" - LESU CAT 374FL EXCAVATOR KiT BUILD PART 2 | RC ADVENTURES