SINGLE-engine | TWIN-engine | MULTI-engine | How to Wire ESC & RECEIVER

STL Files: https://cults3d.com/en/3d-model/gadget/troy-s-3d-printed-rc-dc-6-dc-7-airliner

DC6 Full Build Video: https://www.youtube.com/watch?v=Vp3yEOzvFtg&t=1308s

In this video I am using 30amp ESCs that has a 5v BEC lead to power the receiver. You only need one power lead for your receiver so if you are building a multi engine plane you will need to remove the red power lead from the other ESCs. The brushless motors I am using are 2212 1400kv. The receiver is a AR620 with a NX-10 transmitter.

Thank you so much for watching!
If you like videos like this, consider buying me a coffee, it really supports me: https://www.buymeacoffee.com/troymcmillanrc

See what else I am working on:
https://www.instagram.com/troymcmillan_rc/
https://www.tiktok.com/@troymcmillan_rc
#3DPrinted,#RCAirplane, #itflies

00:00 SINGLE-engine | TWIN-engine | MULTI-engine | How to Wire ESC & RECEIVER
00:14 How to Wire a Single-engine RC airplane ESC, Battery, & Receiver
00:35 What is a BEC for RC airplanes
01:06 How to Wire a Two-engine RC airplane ESC, Battery, & Receiver
02:29 How to Wire a Four-engine RC airplane ESC, Battery, & Receiver
04:49 How to change rotation direction of a brushless motor

Видео SINGLE-engine | TWIN-engine | MULTI-engine | How to Wire ESC & RECEIVER канала Troy McMillan