CAT D10 Dozer Cylinder Rebuild | Part 3 | Making the New Rod
This video is part 3 of rebuilding a Caterpillar D10R dozer blade tilt hydraulic cylinder. In this episode we are replacing the damaged cylinder rod. The rod has scratching and the chrome is damaged so needs to be replaced. We start with pressing out the old bushing to check if the eye is damaged or not. Then the rod is setup in the lathe and we machine and part the eye off the cylinder rod. We machine up the new cylinder rod using 4" inch diameter induction hardened chrome bar. We need to machine both ends of the cylinder rod, the first end we are machining for the piston and cutting the external thread for the nut. The other end of the rod we also machine to fit the original rod eye, which is then MIG welded with metal cored wire before machining down the welds to complete.
Missed Part 1 or Part 2? Watch it here: https://youtube.com/playlist?list=PLUzFN5xVei7WkycyTt9ETThK9uLhVMHsG
In this video we are using:
- HMP-150T Hydraulic press
- TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
Видео CAT D10 Dozer Cylinder Rebuild | Part 3 | Making the New Rod канала Cutting Edge Engineering Australia
Missed Part 1 or Part 2? Watch it here: https://youtube.com/playlist?list=PLUzFN5xVei7WkycyTt9ETThK9uLhVMHsG
In this video we are using:
- HMP-150T Hydraulic press
- TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
Видео CAT D10 Dozer Cylinder Rebuild | Part 3 | Making the New Rod канала Cutting Edge Engineering Australia
Показать
Комментарии отсутствуют
Информация о видео
19 марта 2021 г. 12:00:30
00:29:37
Другие видео канала
Repair a Cracked Caterpillar 789 Dump Truck Suspension Part | Machining & WeldingCAT D10 Dozer Cylinder Rebuild | Part 2 | Making the New BarrelHomemade Metal Band SawLine boring and Bore welding Caterpillar D10 Dozer push arm | Sir Meccanica WS2Machining a new Hydraulic Cylinder Head for CAT 651 Tractor Scraper | Part 1Bridgebort Milling Machine [Rescue]Replacing Eye on Hydraulic Cylinder for Caterpillar D9 Bulldozer | Machining, Welding, MillingCracked Excavator Hydraulic Cylinder Weld Repair | Machining & WeldingRepair a Damaged CAT 631 Scraper Hydraulic Cylinder Rod | Machining, Boring & WeldingAIRCRAFT CONVERSION XXL - A cargo plane is born | Full DocumentaryRepairing Blade on a Caterpillar 140M Motor Grader | FCAW WeldingLine Boring & Bore Welding Caterpillar 730 Dump Truck A-frame Eye | Part 1 | Sir Meccanica WS2Old Rusty, Citroen U23 , T23 Total Engine rebuild in 25 minutesSADDLING 6 inch PIPE to 8 inch PIPE on a 45 ° - 8” CUSTOM PIPE ENTRANCE (Part 3)DiResta BBQ SmokerThe Build l AMAZING SUBARU CNC BILLET ENGINE l Part2 l Subi-PerformanceGen 2 Belt Grinder (Metric plans!)CAT D10 Dozer Cylinder Rebuild | Part 1 | MachiningThe BIG Horizontal Milling Machine Project | Part 1 | Moving into workshop